Polysher™

The Polysher™ is a desktop post processing unit designed to remove layer lines from PolySmooth™ and PolyCast™ prints. The Polysher™ uses Polymaker’s Layer-Free™ technology to create a fine mist of alcohol which evenly smooths the model.

Download the manual HERE

Download the troubleshooting PDF HERE

FAQ

Can the Polysher™ be used with other solvent than IPA?

No, the nebulizer is designed and calibrated to only work with IPA, moreover other solvents may damage the Polysher™. The Polysher™ will not work with PLA.

How often do I need to change the nebulizer?

The nebulizer membrane may develop micro-cracks over time which may affect the mist production performance. We recommend changing the nebulizer when you notice a drop in your mist density or height. The nebulize can usually last ~100hours of polishing time. The Polysher™ comes with 2 nebulizers. Additional nebulizers can be found here.

Does the Polysher™ uses a heat source to work?

No, for additional safety we have developed a technology using a nebulizer to create a mist of micro droplet which will evenly smooth your 3D printed part. NOTE: We do not heat up the IPA and use the vapor to smooth the 3D print.

What do I do if I have an issue with my Polysher?

Please first review THIS DOCUMENT. If that does not help - please contact us by visiting the contact us page, or by starting a chat in the bottom right corner of the screen.