ABS and ASA are very affordable options that will provide some great strength and heat resistance. ASA is also UV resistant - making these great outdoor material options.
ABS and ASA FAQ
Are there any printing requirements?
Both ABS and ASA will require an enclosed printer in order to print properly. This is because an increased ambient air temp (over 45˚C) will make it so you can print without warping or delamination.
It may be possible to print without an enclosure - but the larger and more dense your part is - the more important an enclosure will be. Learn more about .
If you want increased bed adhesion - we would recommend trying Magigoo Original.
What is difference between ABS and ASA?
ASA is almost exactly the same as ABS with 1 major difference and 1 minor difference:
The major difference is ASA is extremely good at weather resistance. (Resistance to UV light and environmental stress cracking)
The minor difference is ASA prints with a nicer matte finish slightly hiding the layer lines.
The mechanical properties and print settings for both will be extremely similar.
Can ABS and ASA be smoothed with acetone?
Yes, PolyLite™ ABS and ASA can be smoothed with acetone.
WARNING: Acetone is a dangerous chemical, please handle it with the necessary safety precautions.
We recommend as a safer alternative to create smooth surface models.
Will the spools work in an AMS?
Yes! We have redesigned the edges of our spools so all Polymaker products will now spin great in the AMS.
Where are all the docs? TDS, SDS, etc.?
You can view all material products' TDS, SDS, and Printing Profiles
You can also find mechanical properties
You can then find our other docs:
Need further information? We would recommend joining our . Thousands of active community members may have already created the profile you are looking for!
