> For the complete documentation index, see [llms.txt](https://wiki.polymaker.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.polymaker.com/polymaker-products/polymaker-filaments/technical-data-at-a-glance.md).

# Technical Data at a Glance

You can find more specific technical data by visiting our [TDS page](/polymaker-products/more-about-our-products/documents/technical-data-sheets.md).  The information below is a quick glance for some basic technical data for all materials.  You can also find more of a breakdown on our [Materials App](https://app.polymaker.com/).<br>

### Functional PLA

<table><thead><tr><th>Product</th><th data-type="number">Density (g/cm³)</th><th data-type="number">XY Tensile Strength (MpA)</th><th>HDT 0.45 Mpa</th><th width="118">Vicat Softening Temp.</th><th data-type="number">Charpy Impact XY Notched (Kj/m²)</th></tr></thead><tbody><tr><td>PolyLite™ PLA</td><td>1.17</td><td>52.3</td><td>60°C</td><td>63 °C</td><td>3.3</td></tr><tr><td>PolyLite™ PLA Pro</td><td>1.23</td><td>49.8</td><td>59°C</td><td>63 °C</td><td>17.1</td></tr><tr><td>Polymaker™ PLA Pro</td><td>1.237</td><td>39.93</td><td>58.1°C</td><td>63.5°C</td><td>20.76</td></tr><tr><td>PolyMax™ PLA</td><td>1.2</td><td>41.3</td><td>55°C</td><td>62 °C</td><td>38.9</td></tr><tr><td>PolySonic™ PLA</td><td>1.23</td><td>46</td><td>53°C</td><td>61 °C</td><td>5</td></tr><tr><td>PolySonic™ PLA Pro</td><td>1.23</td><td>41.2</td><td>55°C</td><td></td><td>19.4</td></tr><tr><td>LW-PLA</td><td>0.9</td><td>24.4</td><td>54°C</td><td>60°C</td><td>2.4</td></tr><tr><td>PLA-CF</td><td>1.29</td><td>31.2</td><td>54°C</td><td>64 °C</td><td>5.5</td></tr><tr><td>HT-PLA (unannealed)</td><td>1.287</td><td>42.86</td><td>61.4°C</td><td>156.2°C</td><td>4.94</td></tr><tr><td>HT-PLA (annealed)</td><td>1.287</td><td>42.86</td><td>107.2°C</td><td>155.2°C</td><td>4.67</td></tr><tr><td>HT-PLA-GF (unannealed)</td><td>1.337</td><td>50.09</td><td>75.5°C</td><td>148.9°C</td><td>5.31</td></tr><tr><td>HT-PLA-GF (annealed)</td><td>1.337</td><td>50.2</td><td>114.7°C</td><td>148.3°C</td><td>4.92</td></tr></tbody></table>

### Panchroma PLA

<table><thead><tr><th>Product</th><th data-type="number">Density (g/cm³)</th><th data-type="number">XY Tensile Strength (MpA)</th><th width="119">Vicat Softening Temp.</th><th data-type="number">Charpy Impact XY Notched (Kj/m²)</th></tr></thead><tbody><tr><td>Basic Colors</td><td>1.32</td><td>40.4</td><td>62°C</td><td>6.76</td></tr><tr><td>Matte</td><td>1.37</td><td>23.2</td><td>62°C</td><td>10</td></tr><tr><td>Satin</td><td>1.24</td><td>31.1</td><td>62°C</td><td>6.7</td></tr><tr><td>Silk</td><td>1.24</td><td>41.1</td><td>64.7°C</td><td>13.8</td></tr><tr><td>Others</td><td>1.17</td><td>52.3</td><td>63°C</td><td>3.3</td></tr></tbody></table>

### PET/PETG

<table><thead><tr><th>Product</th><th data-type="number">Density (g/cm³)</th><th data-type="number">XY Tensile Strength (MpA)</th><th>HDT 0.45 Mpa</th><th width="112">Vicat Softening Temp.</th><th data-type="number">Charpy Impact XY Notched (Kj/m²)</th></tr></thead><tbody><tr><td>Polymaker™ PETG</td><td>1.3</td><td>47.96</td><td>69°C</td><td>75°C</td><td>4.95</td></tr><tr><td>PolyLite™ PETG</td><td>1.25</td><td>50.8</td><td>78°C</td><td>84 °C</td><td>2.6</td></tr><tr><td>PolyMax™ PETG</td><td>1.24</td><td>37.9</td><td>76°C</td><td>82 °C</td><td>11.6</td></tr><tr><td>Fiberon™ PETG-rCF08</td><td>1.3</td><td>59.8</td><td>68.6°C</td><td>81.6 °C</td><td>4</td></tr><tr><td>Fiberon™ PETG-ESD</td><td>1.24</td><td>36.1</td><td>76°C</td><td>81.6 °C</td><td>5.7</td></tr><tr><td>Fiberon™ PET-CF17 (annealed)</td><td>1.34</td><td>65.9</td><td>147.5°C</td><td>238.4 °C</td><td>5.1</td></tr><tr><td>Fiberon™ PET-GF15 (annealed)</td><td>1.43</td><td>59.9</td><td>133.7°C</td><td>232.6°C</td><td>8.7</td></tr></tbody></table>

### ABS/ASA

<table><thead><tr><th>Product</th><th data-type="number">Density (g/cm³)</th><th data-type="number">XY Tensile Strength (MpA)</th><th>HDT 0.45 Mpa</th><th width="116">Vicat Softening Temp.</th><th data-type="number">Charpy Impact XY Notched (Kj/m²)</th></tr></thead><tbody><tr><td>PolyLite™ ABS</td><td>1.04</td><td>33.4</td><td>100°C</td><td>104°C</td><td>18</td></tr><tr><td>Polymaker™ ABS Pro</td><td>1.04</td><td>34.94</td><td>106.4°C</td><td>116.1°C</td><td>17.32</td></tr><tr><td>Polymaker™ ABS Max</td><td>1.06</td><td>35.66</td><td>118.1°C</td><td>127.4°C</td><td>10.51</td></tr><tr><td>Polymaker™ ASA</td><td>1.13</td><td>43.8</td><td>103°C</td><td>105°C</td><td>10.3</td></tr><tr><td>Fiberon™ ASA-CF08</td><td>1.09</td><td>43.5</td><td>103°C</td><td>110.8°C</td><td>5.5</td></tr></tbody></table>

### TPU

<table><thead><tr><th>Product</th><th data-type="number">Density (g/cm³)</th><th>Elongation at Break XY</th></tr></thead><tbody><tr><td>PolyFlex™ TPU90</td><td>1.21</td><td>592.%</td></tr><tr><td>PolyFlex™ TPU95</td><td>1.22</td><td>551.2%</td></tr><tr><td>PolyFlex™ TPU95-HF</td><td>1.16</td><td>495.8%</td></tr></tbody></table>

### Polycarbonate

<table><thead><tr><th>Product</th><th data-type="number">Density (g/cm³)</th><th data-type="number">XY Tensile Strength (MpA)</th><th>HDT 0.45 Mpa</th><th width="115">Vicat Softening Temp.</th><th data-type="number">Charpy Impact XY Notched (Kj/m²)</th></tr></thead><tbody><tr><td>PolyLite™ PC</td><td>1.19</td><td>69.1</td><td>111°C</td><td>120 °C</td><td>4.1</td></tr><tr><td>PolyMax™ PC</td><td>1.19</td><td>53.44</td><td>114°C</td><td>117 °C</td><td>21.28</td></tr><tr><td>Polymaker PC-ABS</td><td>1.1</td><td>39.9</td><td>112°C</td><td>135 °C</td><td>25.8</td></tr></tbody></table>

### Nylon (all samples annealed)

<table><thead><tr><th>Product</th><th data-type="number">Density (g/cm³)</th><th data-type="number">XY Tensile Strength (MpA)</th><th>HDT 0.45 Mpa</th><th width="115">Vicat Softening Temp.</th><th data-type="number">Charpy Impact XY Notched (Kj/m²)</th></tr></thead><tbody><tr><td>PolyMide™ CoPA</td><td>1.12</td><td>78</td><td>111°C</td><td>180 °C</td><td>6.9</td></tr><tr><td>
Fiberon™ PA612-CF15</td><td>1.03</td><td>91.9</td><td>175°C</td><td>206.2 °C</td><td>8.1</td></tr><tr><td>Fiberon™ PA6-CF20</td><td>1.17</td><td>109.3</td><td>215°C</td><td>219.2 °C</td><td>11</td></tr><tr><td>Fiberon™ PA6-GF25</td><td>1.2</td><td>80.1</td><td>191°C</td><td>211.7 °C</td><td>10</td></tr><tr><td>Fiberon™ PA12-CF10</td><td>1.06</td><td>77.4</td><td>131°C</td><td>170.2 °C</td><td>9.9</td></tr><tr><td>Fiberon™ PA612-ESD</td><td>1.1</td><td>84.3</td><td>157°C</td><td>190.0 °C</td><td>5.9</td></tr></tbody></table>

### PPS (all samples annealed)

<table><thead><tr><th>Product</th><th data-type="number">Density (g/cm³)</th><th data-type="number">XY Tensile Strength (MpA)</th><th>HDT 0.45 Mpa</th><th>Vicat Softening Temp.</th><th data-type="number">Charpy Impact XY Notched (Kj/m²)</th></tr></thead><tbody><tr><td>Fiberon™ PPS-CF10</td><td>1.29</td><td>59.4</td><td>252.5°C</td><td>267.5 °C</td><td>5.3</td></tr><tr><td>Fiberon™ PPS-GF20</td><td>1.36</td><td>64.1</td><td>236.3°C</td><td>272.5 °C</td><td>7.3</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.polymaker.com/polymaker-products/polymaker-filaments/technical-data-at-a-glance.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.