# PolyFlex™ TPU90

{% tabs %}
{% tab title="Bambu Lab" %}
{% file src="<https://3491278982-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCp7LK0pgIUpVwJdO2wqk%2Fuploads%2FgBLSJJY0OcQ5K20DTz3E%2FPolymaker%20TPU%20PolyFlex%20TPU90.bbsflmt?alt=media&token=3304e07e-5f81-429a-8303-df373404f837>" %}
For Bambu Lab A1, A1 Mini, P1P, P1S, X1C, X1E using Bambu Studio - Uploaded by Polymaker
{% endfile %}
{% endtab %}

{% tab title="Creality" %}

{% endtab %}

{% tab title="Prusa" %}

{% endtab %}

{% tab title="Ultimaker" %}
{% file src="<https://3491278982-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FCp7LK0pgIUpVwJdO2wqk%2Fuploads%2FlZTlCoUsfpUqpDzP75qA%2FPolyFlex_TPU90_Ultimaker_S5_Cura.curaprofile?alt=media&token=91fbbb21-7ff2-4a55-be7e-79495702798f>" %}
For Ultimaker S5 using Cura - Uploaded by Polymaker
{% endfile %}
{% endtab %}

{% tab title="Others" %}

{% endtab %}
{% endtabs %}

Can't find the profile you are looking for? Join our very active [Discord](https://discord.polymaker.com/) where thousands of members may have already made the profile you need.

**NOTE FOR PolyFlex™ TPU90: This material can be difficult to print without stringing when you have a lot of travel paths.  The above profile is optimized to try to keep stringing down while preventing holes in print.**  \
**Support structures can also be very difficult to remove from TPU90 due to the strong layer adhesion - so it is advisable to design your parts to reduce the amount of overhangs.**  \
**It is also not advisable to print using a Bowden extruder setup.**

***NOTE FOR ALL PROFILES:** These profiles were made to create successful prints for the user who created them - but every model may need tweaks to create the best print possible.  If you have any upgrades or changes to your printer - you may need to tweak the above profiles as well.*