PolyFlex™ TPU90

Bambu Lab

26KB

Polymaker TPU PolyFlex TPU90.bbsflmt

For Bambu Lab A1, A1 Mini, P1P, P1S, X1C, X1E using Bambu Studio - Uploaded by Polymaker

Creality

Prusa

Ultimaker

3KB

PolyFlex_TPU90_Ultimaker_S5_Cura.curaprofile

For Ultimaker S5 using Cura - Uploaded by Polymaker

Others

Can't find the profile you are looking for? Join our very active Discord where thousands of members may have already made the profile you need.

NOTE FOR PolyFlex™ TPU90: This material can be difficult to print without stringing when you have a lot of travel paths. The above profile is optimized to try to keep stringing down while preventing holes in print. Support structures can also be very difficult to remove from TPU90 due to the strong layer adhesion - so it is advisable to design your parts to reduce the amount of overhangs. It is also not advisable to print using a Bowden extruder setup.

NOTE FOR ALL PROFILES: These profiles were made to create successful prints for the user who created them - but every model may need tweaks to create the best print possible. If you have any upgrades or changes to your printer - you may need to tweak the above profiles as well.