> For the complete documentation index, see [llms.txt](https://wiki.polymaker.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues.md).

# Problemas comunes de impresión

- [Manchas negras en la impresión](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/black-spots-on-print.md)
- [Manchas y goteo](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/blobs-and-oozing.md)
- [Filamento quebradizo](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/brittle-filament.md)
- [Curvatura de capas y esquinas](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/curling-of-layers-and-angles.md)
- [Cambio/inversión de filamento de doble color](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/dual-color-filament-swapping-flipping.md)
- [Pie de elefante (primera capa aplastada)](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/elephant-foot-smooshed-first-layer.md)
- [El motor del extrusor salta/hace clic](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/extruder-motor-skipping-clicking.md)
- [Ghosting (efecto eco/ringing)](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/ghosting-echo-ringing-effect.md)
- [Impresiones peludas o con hilos](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/hairy-or-stringy-prints.md)
- [Abultamientos de capa](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/layer-bulges.md)
- [Desplazamientos de capa](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/layer-shifts.md)
- [Capas faltantes y agujeros en las impresiones](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/missing-layers-and-holes-in-prints.md)
- [Obstrucciones de la boquilla](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/nozzle-clogs.md)
- [Parte superior abombada/ahuecada de la impresión](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/pillowed-pitted-top-of-print.md)
- [Puentes deficientes](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/poor-bridging.md)
- [Mala adhesión entre capas](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/poor-layer-adhesion.md)
- [La impresión no se adhiere a la base de impresión](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/print-not-sticking-to-build-plate.md)
- [La impresión se pega demasiado a la base de impresión](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/print-sticking-too-well-to-build-plate.md)
- [Se está acabando el filamento](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/running-out-of-filament.md)
- [Partes superiores feas de las impresiones o impresiones finas feas](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/ugly-tops-of-prints-or-ugly-thin-prints.md)
- [Alabeo](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/warping.md): Todo sobre deformaciones y la impresión 3D
- [Filamento húmedo](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/wet-filament.md)
- [Oscilación del eje Z](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues/z-axis-wobble.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-es/consejos-de-impresion/common-printing-issues.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.