> For the complete documentation index, see [llms.txt](https://wiki.polymaker.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1.md).

# 출력 팁

- [소재별 가이드](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined.md)
- [테스트 출력](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined/undefined.md)
- [흔한 출력 문제](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1.md)
- [출력물의 검은 점](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined.md)
- [블롭과 오징](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-1.md)
- [잘 부러지는 필라멘트](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-2.md)
- [레이어와 모서리 말림](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-3.md)
- [듀얼 컬러 필라멘트 뒤집힘 / 색 반전](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-4.md)
- [엘리펀트 풋(눌린 첫 레이어)](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-5.md)
- [익스트루더 모터 스킵](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-6.md)
- [고스팅(에코 / 링잉)](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-7.md)
- [털 같거나 실 같은 출력물](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-8.md)
- [레이어 돌출](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-9.md)
- [노즐 막힘](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-10.md)
- [레이어 시프트](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-11.md)
- [출력물의 누락 레이어와 구멍](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-12.md)
- [브리징 불량](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-13.md)
- [레이어 접착 불량](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-14.md)
- [출력물이 빌드 플레이트에 붙지 않음](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-15.md)
- [출력물이 빌드 플레이트에 너무 강하게 붙음](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-16.md)
- [필라멘트 부족](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-17.md)
- [출력물 상단이 거칠거나 얇은 부위가 망가짐](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-18.md)
- [뒤틀림](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-19.md): 뒤틀림과 3D 프린팅 총정리
- [습기 먹은 필라멘트](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-20.md)
- [Z축 흔들림](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/z.md)
- [출력물 상단에 패임이나 울렁거림이 생김](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-1/undefined-21.md)
- [후처리](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-2.md)
- [어닐링](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-2/undefined.md)
- [수분 컨디셔닝](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-2/undefined-1.md)
- [접착](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-2/undefined-2.md)
- [샌딩](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-2/undefined-3.md)
- [스무딩](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-2/undefined-4.md)
- [도색](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-2/undefined-5.md)
- [재료 과학](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-3.md)
- [고분자란?](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-3/undefined.md)
- [온도와 고분자](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-3/undefined-1.md)
- [뒤틀림](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-3/undefined-2.md)
- [오징](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-3/undefined-3.md)
- [오버행](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-3/undefined-4.md)
- [강도 시험](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1/undefined-3/undefined-5.md)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ko/undefined-1.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.