> For the complete documentation index, see [llms.txt](https://wiki.polymaker.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ru/produkty-polymaker/polymaker-filaments/technical-data-at-a-glance.md).

# Технические данные вкратце

Вы можете найти более подробные технические данные, посетив нашу [страницу TDS](/polymaker-wiki/polymaker-wiki-ru/produkty-polymaker/more-about-our-products/documents/technical-data-sheets.md). Информация ниже — краткий обзор некоторых основных технических данных для всех материалов. Вы также можете найти более подробный разбор на нашей [приложении Materials](https://app.polymaker.com/).<br>

### Функциональный PLA

<table><thead><tr><th>Продукт</th><th data-type="number">Плотность (г/см³)</th><th data-type="number">Прочность на растяжение XY (МПа)</th><th>HDT при 0,45 МПа</th><th width="118">Температура размягчения по Вика</th><th data-type="number">Ударная вязкость по Шарпи, XY с надрезом (кДж/м²)</th></tr></thead><tbody><tr><td>PolyLite™ PLA</td><td>1.17</td><td>52.3</td><td>60°C</td><td>63 °C</td><td>3.3</td></tr><tr><td>PolyLite™ PLA Pro</td><td>1.23</td><td>49.8</td><td>59°C</td><td>63 °C</td><td>17.1</td></tr><tr><td>Polymaker™ PLA Pro</td><td>1.237</td><td>39.93</td><td>58.1°C</td><td>63.5°C</td><td>20.76</td></tr><tr><td>PolyMax™ PLA</td><td>1.2</td><td>41.3</td><td>55°C</td><td>62 °C</td><td>38.9</td></tr><tr><td>PolySonic™ PLA</td><td>1.23</td><td>46</td><td>53°C</td><td>61 °C</td><td>5</td></tr><tr><td>LW-PLA</td><td>0.9</td><td>24.4</td><td>54°C</td><td>60°C</td><td>2.4</td></tr><tr><td>PLA-CF</td><td>1.29</td><td>31.2</td><td>54°C</td><td>64 °C</td><td>5.5</td></tr><tr><td>HT-PLA (неотожжённый)</td><td>1.287</td><td>42.86</td><td>61.4°C</td><td>156.2°C</td><td>4.94</td></tr><tr><td>HT-PLA (отожжённый)</td><td>1.287</td><td>42.86</td><td>107.2°C</td><td>155.2°C</td><td>4.67</td></tr><tr><td>HT-PLA-GF (неотожжённый)</td><td>1.337</td><td>50.09</td><td>75.5°C</td><td>148.9°C</td><td>5.31</td></tr><tr><td>HT-PLA-GF (отожжённый)</td><td>1.337</td><td>50.2</td><td>114.7°C</td><td>148.3°C</td><td>4.92</td></tr><tr><td><p>HT-PLA Pro</p><p>(неотожжённый)</p></td><td>1.24</td><td>37.6</td><td>56.3</td><td>148.3</td><td>9.94</td></tr><tr><td>HT-PLA Pro<br>(отожжённый)</td><td>1.24</td><td>38.2</td><td>107.6</td><td>150.5</td><td>10.1</td></tr></tbody></table>

### Panchroma PLA

<table><thead><tr><th>Продукт</th><th data-type="number">Плотность (г/см³)</th><th data-type="number">Прочность на растяжение XY (МПа)</th><th width="119">Температура размягчения по Вика</th><th data-type="number">Ударная вязкость по Шарпи, XY с надрезом (кДж/м²)</th></tr></thead><tbody><tr><td>Базовые цвета</td><td>1.32</td><td>40.4</td><td>62°C</td><td>6.76</td></tr><tr><td>Матовый</td><td>1.37</td><td>23.2</td><td>62°C</td><td>10</td></tr><tr><td>Сатиновый</td><td>1.24</td><td>31.1</td><td>62°C</td><td>6.7</td></tr><tr><td>Шелковый</td><td>1.24</td><td>41.1</td><td>64.7°C</td><td>13.8</td></tr><tr><td>Другие</td><td>1.17</td><td>52.3</td><td>63°C</td><td>3.3</td></tr></tbody></table>

### PET/PETG

<table><thead><tr><th>Продукт</th><th data-type="number">Плотность (г/см³)</th><th data-type="number">Прочность на растяжение XY (МПа)</th><th>HDT при 0,45 МПа</th><th width="112">Температура размягчения по Вика</th><th data-type="number">Ударная вязкость по Шарпи, XY с надрезом (кДж/м²)</th></tr></thead><tbody><tr><td>Polymaker™ PETG</td><td>1.3</td><td>47.96</td><td>69°C</td><td>75°C</td><td>4.95</td></tr><tr><td>PolyLite™ PETG</td><td>1.25</td><td>50.8</td><td>78°C</td><td>84 °C</td><td>2.6</td></tr><tr><td>PolyMax™ PETG</td><td>1.24</td><td>37.9</td><td>76°C</td><td>82 °C</td><td>11.6</td></tr><tr><td>Fiberon™ PETG-rCF08</td><td>1.3</td><td>59.8</td><td>68.6°C</td><td>81.6 °C</td><td>4</td></tr><tr><td>Fiberon™ PETG-ESD</td><td>1.24</td><td>36.1</td><td>76°C</td><td>81.6 °C</td><td>5.7</td></tr><tr><td>Fiberon™ PET-CF17 (отожжённый)</td><td>1.34</td><td>65.9</td><td>147.5°C</td><td>238.4 °C</td><td>5.1</td></tr><tr><td>Fiberon™ PET-GF15 (отожжённый)</td><td>1.43</td><td>59.9</td><td>133.7°C</td><td>232.6°C</td><td>8.7</td></tr></tbody></table>

### ABS/ASA

<table><thead><tr><th>Продукт</th><th data-type="number">Плотность (г/см³)</th><th data-type="number">Прочность на растяжение XY (МПа)</th><th>HDT при 0,45 МПа</th><th width="116">Температура размягчения по Вика</th><th data-type="number">Ударная вязкость по Шарпи, XY с надрезом (кДж/м²)</th></tr></thead><tbody><tr><td>PolyLite™ ABS</td><td>1.04</td><td>33.4</td><td>100°C</td><td>104°C</td><td>18</td></tr><tr><td>Polymaker™ ABS Pro</td><td>1.04</td><td>34.94</td><td>106.4°C</td><td>116.1°C</td><td>17.32</td></tr><tr><td>Polymaker™ ABS Max</td><td>1.06</td><td>35.66</td><td>118.1°C</td><td>127.4°C</td><td>10.51</td></tr><tr><td>Polymaker™ ASA</td><td>1.13</td><td>43.8</td><td>103°C</td><td>105°C</td><td>10.3</td></tr><tr><td>Fiberon™ ASA-CF08</td><td>1.09</td><td>43.5</td><td>103°C</td><td>110.8°C</td><td>5.5</td></tr></tbody></table>

### TPU

<table><thead><tr><th>Продукт</th><th data-type="number">Плотность (г/см³)</th><th>Относительное удлинение при разрыве XY</th></tr></thead><tbody><tr><td>PolyFlex™ TPU90</td><td>1.21</td><td>592.%</td></tr><tr><td>PolyFlex™ TPU95</td><td>1.22</td><td>551.2%</td></tr><tr><td>PolyFlex™ TPU95-HF</td><td>1.16</td><td>495.8%</td></tr></tbody></table>

### Поликарбонат

<table><thead><tr><th>Продукт</th><th data-type="number">Плотность (г/см³)</th><th data-type="number">Прочность на растяжение XY (МПа)</th><th>HDT при 0,45 МПа</th><th width="115">Температура размягчения по Вика</th><th data-type="number">Ударная вязкость по Шарпи, XY с надрезом (кДж/м²)</th></tr></thead><tbody><tr><td>PolyLite™ PC</td><td>1.19</td><td>69.1</td><td>111°C</td><td>120 °C</td><td>4.1</td></tr><tr><td>PolyMax™ PC</td><td>1.19</td><td>53.44</td><td>114°C</td><td>117 °C</td><td>21.28</td></tr><tr><td>Polymaker PC-ABS</td><td>1.1</td><td>39.9</td><td>112°C</td><td>135 °C</td><td>25.8</td></tr></tbody></table>

### Нейлон (все образцы отожжены)

<table><thead><tr><th>Продукт</th><th data-type="number">Плотность (г/см³)</th><th data-type="number">Прочность на растяжение XY (МПа)</th><th>HDT при 0,45 МПа</th><th width="115">Температура размягчения по Вика</th><th data-type="number">Ударная вязкость по Шарпи, XY с надрезом (кДж/м²)</th></tr></thead><tbody><tr><td>PolyMide™ CoPA</td><td>1.12</td><td>78</td><td>111°C</td><td>180 °C</td><td>6.9</td></tr><tr><td>Fiberon™ PA612-CF15</td><td>1.03</td><td>91.9</td><td>175°C</td><td>206.2 °C</td><td>8.1</td></tr><tr><td>Fiberon™ PA6-CF20</td><td>1.17</td><td>109.3</td><td>215°C</td><td>219.2 °C</td><td>11</td></tr><tr><td>Fiberon™ PA6-GF25</td><td>1.2</td><td>80.1</td><td>191°C</td><td>211.7 °C</td><td>10</td></tr><tr><td>Fiberon™ PA12-CF10</td><td>1.06</td><td>77.4</td><td>131°C</td><td>170.2 °C</td><td>9.9</td></tr><tr><td>Fiberon™ PA612-ESD</td><td>1.1</td><td>84.3</td><td>157°C</td><td>190.0 °C</td><td>5.9</td></tr></tbody></table>

### PPS (все образцы отожжены)

<table><thead><tr><th>Продукт</th><th data-type="number">Плотность (г/см³)</th><th data-type="number">Прочность на растяжение XY (МПа)</th><th>HDT при 0,45 МПа</th><th>Температура размягчения по Вика</th><th data-type="number">Ударная вязкость по Шарпи, XY с надрезом (кДж/м²)</th></tr></thead><tbody><tr><td>Fiberon™ PPS-CF10</td><td>1.29</td><td>59.4</td><td>252.5°C</td><td>267.5 °C</td><td>5.3</td></tr><tr><td>Fiberon™ PPS-GF20</td><td>1.36</td><td>64.1</td><td>236.3°C</td><td>272.5 °C</td><td>7.3</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-ru/produkty-polymaker/polymaker-filaments/technical-data-at-a-glance.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.