> For the complete documentation index, see [llms.txt](https://wiki.polymaker.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/chang-jian-da-yin-wen-ti/poor-layer-adhesion.md).

# 层间粘合差

强大的层间附着力不仅是打印水密部件的必要条件，也是获得整洁、坚固打印件的前提。如果你的每一层之间无法良好粘合，打印件最终必然会断裂或剥离。

### **了解所使用的材料**

每种材料都需要特定的设置，包括温度和速度。你需要确保针对所使用的材料类型采用了正确的设置，这些设置包含在我们每个产品页面中。

在尝试解决此问题之前，请参阅“[材料科学](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/cai-liao-ke-xue.md)”页面。

### **提高挤出温度**

层间附着力差最常见的原因之一是打印时的挤出温度过低。

遵循制造商指南通常是防止打印温度过低的有效方法。如果你在高速打印柔性耗材，这一点尤为重要。

尝试稍微提高挤出温度，看看是否有助于解决此问题。

### **使用更大直径的喷嘴**

正如“[材料科学](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/cai-liao-ke-xue.md)”页面所述，通过增加层与层之间的缠结量，可以提高层间附着力。增加层间附着力的一种方法是增加喷嘴的接触面积。使用更大直径的喷嘴将极大地有助于实现良好的层间附着力。

### **降低打印速度**

与使用更大直径喷嘴的原理类似，你也可以降低打印速度，使喷嘴与下方打印层接触的时间更长。通过更大的喷嘴和更慢的打印速度，层与层之间的缠结量会增加，从而获得更强的层间附着力。

当我们使用 ABS 或 ASA 等材料打印时，我们倾向于使用 0.6mm 喷嘴，并以非常慢的速度和非常高的温度进行打印。实际上，我们打印 ABS 的温度约为 260°C，速度约为 35mm/s。这种“慢速高温”的方法确实有助于确保你的部件具有非常强的层间附着力。

### **挤出不足**

导致层间附着力差的另一个原因是挤出不足。如果你的挤出机沉积的耗材量少于预期，那么层间附着力必然会变弱。

如果你更换了挤出机或使用的是 DIY 打印机，请确认你已设置了正确的 E-steps。

这也可能是由暂时性挤出不足引起的，我们在“[打印件缺失层和孔洞](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/chang-jian-da-yin-wen-ti/missing-layers-and-holes-in-prints.md)”页面中涵盖了许多相关提示。你基本上需要确保挤出机齿轮紧固在步进电机轴上，且没有任何间隙，不过你应该完整阅读该页面以获取详细说明。

### **扭矩不足**

如果你的挤出机电机跳步，打印件本质上会出现挤出不足或层间附着力差的问题。请参阅“[挤出机电机跳步](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/ji-chu-zhi-shi/3d-da-yin-ji/3d-da-yin-ji-shi-yi-tu/ji-chu-ji.md)”页面以获取更多提示。

解决此问题的最佳方法是升级到齿轮减速挤出机（如果尚未升级的话）。

### **关闭主动冷却风扇**

虽然开启主动冷却风扇对大多数打印件和材料的表面质量有益，但许多耗材需要你保持主动冷却风扇关闭，以获得足够的强度和层间附着力。

这不仅有助于防止翘曲，还有助于实现强大的层间附着力。通常，聚合物的热容量和密度越高，冷却风扇的益处就越大。对于密度低于 1.2g/cc 的低密度聚合物（如 ABS、HIPS 等），通常建议关闭风扇。

请务必查看制造商针对你所用特定材料的推荐设置，因为许多材料在没有主动冷却风扇的情况下，层间附着力会更好。

### **确保材料储存得当**

与其他许多问题一样，请确保你的材料储存得当。陈旧或受潮的耗材会导致非常难以诊断的问题。

### **分层（Delamination）**

![](https://attachments.gorgias.help/vo0l5/hc/g8y3/ba5a823c-a509-4038-9478-1674ffe7a52d-6e628568-3375-4996-861d-93d8e4be0a33.jpeg)

我们个人认为分层（Delamination）与单纯的层间附着力差是不同的问题。即使层间附着力极强，在使用易翘曲材料打印时，仍可能出现分层现象。

因此，我们在“[翘曲](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/chang-jian-da-yin-wen-ti/qiao-qu.md)”页面中专门讨论了这个问题，因为分层更多是严重翘曲的症状，而不仅仅是层间附着力差。

## **提高层间附着力的方法总结**

* 阅读“[材料科学](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/cai-liao-ke-xue.md)”页面。
* 查看制造商推荐的打印设置。在开始测试时，不要超过其范围进行提速或更改温度。
* 如果持续遇到问题，请停止使用碳纤维增强材料，因为与其它类型的耗材相比，碳纤维增强材料在层间附着力方面更容易出现问题。
* 如果在推荐设置范围内仍出现层间附着力差的问题，请尝试稍微提高挤出温度。
* 使用更大直径的喷嘴。
* 降低打印速度。
* 检查 E-steps 并确认没有出现挤出不足。
* 确认扭矩充足，且挤出机电机没有跳步。
* 如果特定材料不需要，请关闭主动冷却风扇。
* 确保所使用的材料没有质量问题。
* 如果出现分层现象，请查看“[翘曲](https://us.polymaker.com/blogs/3d-printing-tips/warping)”页面。

{% embed url="<https://www.youtube.com/shorts/XM0rA0kHB5w>" %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/chang-jian-da-yin-wen-ti/poor-layer-adhesion.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
