> For the complete documentation index, see [llms.txt](https://wiki.polymaker.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/chang-jian-da-yin-wen-ti/ugly-tops-of-prints-or-ugly-thin-prints.md).

# 打印件顶部外观不佳或薄壁件外观不佳

当打印件的某一层表面积非常小时，就会出现这个问题。这在打印尖顶形状（例如金字塔）的部件时最为常见。

这是因为上一层还没有足够的时间冷却，下一层炽热的材料就覆盖了上来。这会导致尖顶部分的打印件看起来融化且非常难看。

解决这个问题有几种非常简单的方法，但每种方法都有一些缺点。本质上，我们需要增加该层冷却的时间，或者提高该层的冷却速度。

**同时打印多个对象**

显然，这并不是所有情况下的最佳解决方案，因为它要求你打印多个相同的对象，这意味着如果你只需要打印一个，就会浪费材料。

话虽如此，如果你打印的模型非常小，这是一种首选方法。这是因为当打印头移动去打印第二个对象时，这些薄壁区域将有时间冷却。这也意味着你无需担心渗料（oozing）问题，因为打印头不会停顿，从而避免了渗料的发生。

### **提高冷却风扇转速**

如果你使用的材料支持主动冷却风扇，那么提高风扇转速意味着每一层都能更快地冷却。

当然，如果使用像 PC 这样不能快速冷却的材料，这种方法会有缺点。但如果你使用的是像 PLA 这样支持主动冷却的材料，那么在打印这些薄壁部分时，请大胆调高风扇转速。

### **开启/增加“最小层时间”（Minimum Layer Time）**

具体设置位置以及打印机的执行方式取决于你所使用的切片软件，但你总是可以增加最小层时间：

![](https://cdn.shopify.com/s/files/1/0548/7299/7945/files/min_layer_time_480x480.jpg?v=1726087326)

通常情况下，大多数材料在 3-5 秒的最小层时间下表现良好。因此，如果我们将其设置为 3 秒，而某一层在 3 秒内就完成了打印，打印机将会暂停并等待，直到达到该时间后再开始下一层。如果你的某一层在 1 秒内就完成了打印并立即开始下一层而不暂停，那么上一层仍然处于高温状态，当喷嘴再次经过时，它就会开始向上卷曲。

这种方法显然有一个缺点，即会增加渗料，因为喷嘴会停留在打印件上方，重力和残余压力会导致材料渗出。

有些切片软件会降低打印速度，使得打印机在上述示例中至少需要 3 秒才能完成一层。这种方法也有一个缺点：如果你打印的是表面积非常小的层，由于炽热的喷嘴现在在同一区域缓慢移动，你仍然可能会得到外观不佳的打印件。

## **3D 打印件顶部外观不佳的修复总结**

* 同时打印多个对象，以便每一层都有更多时间冷却
* 提高冷却风扇转速，以加快冷却速度
* 增加最小层时间，以便每一层都有更多时间冷却

{% embed url="<https://www.youtube.com/shorts/8X7WAe_XxPs>" %}

上一页 下一页


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/chang-jian-da-yin-wen-ti/ugly-tops-of-prints-or-ugly-thin-prints.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
