> For the complete documentation index, see [llms.txt](https://wiki.polymaker.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/chang-jian-da-yin-wen-ti/running-out-of-filament.md).

# 耗材用尽

这个问题是最容易诊断的问题之一，但一旦发生，也是最令人沮丧的情况之一。你可能以为有足够的耗材来完成一个 400 克的打印件，结果在打印了 20 小时后，仅剩最后几层时耗材却用完了。

为了防止此问题，请考虑以下预防措施：

### **称量空料盘**

记录下所用耗材制造商提供的空料盘重量（以克为单位）。虽然可能会有一些偏差，但这提供了一个可靠的起点。称量准备用于下一次打印的料盘，减去空料盘的重量，即可估算出剩余的耗材量。请预留至少 20 克的缓冲量，以应对料盘的公差。

### **在特定层高处暂停**

当开始打印时，如果料盘中的耗材不足以完成任务，可以在切片软件中添加“在层高处暂停”（Pause at Layer Height）命令。在 Cura 中，导航至“扩展”（Extensions）>“后处理”（Post-Processing）>“修改 G-code”（Modify G-Code），然后添加“在高度处暂停”（Pause at Height）脚本。选择打印机暂停所需的层或高度，以便更换料盘。此功能对于大型打印件或没有完整料盘时特别有用。它也可用于在打印过程中更换耗材颜色。

### **了解材料密度**

切片程序通常以克为单位估算材料用量，但如果材料与默认机器设置不同，估算结果可能不准确。例如，估算通常基于 PLA 的密度。如果估算值以米为单位，可以通过简单的计算将其转换为特定材料的克数。

PolyLite PLA 的密度为 1.19 克/立方厘米。如果你使用的是直径 1.75mm 的耗材，一米耗材的体积为 2.41 立方厘米。

那么，1 米 1.75mm 的 PLA 耗材等于 2.41 x 1.19，即 2.8679 克。一盘 1,000 克的 PLA 耗材大约应有 348.7 米。

使用 1.75mm 耗材 2.41 立方厘米的体积，你可以利用下方数据计算出你的打印件预计需要多少克材料。

#### **以下数据适用于 Polymaker，具体数值会因制造商而异：**

* PolyLite PLA: 1.19 g/ccm – 每米 2.87 克（1.75mm 耗材）。1KG = 348.7 米。
* PolyLite ABS: 1.12 g/ccm – 每米 2.7 克（1.75mm 耗材）。1KG = 370.37 米
* PolyLite PET: 1.25 g/ccm – 每米 3.01 克（1.75mm 耗材）。1KG = 332.23 米
* CoPA Nylon: 1.12 g/ccm – 每米 2.7 克（1.75mm 耗材）。1KG = 370.37 米

对于 2.85mm 耗材，请使用 6.38 立方厘米作为每米的体积。

#### **总结：**

1.75 mm 耗材 = 1 米耗材体积为 2.41 立方厘米。\
2.41 x 密度 = 1 米耗材的克数。\
料盘重量 / 1 米耗材的克数 = 耗材长度（以米为单位）

***注意：所有制造商的材料比重（密度）各不相同。这意味着你应该始终在切片软件中使用制造商提供的密度，以获得准确的估算。***

**使用耗材断料检测传感器**\
许多 3D 打印机现在都内置了耗材断料检测传感器，或者可以通过一些固件调整来添加。这些传感器价格低廉，当检测不到耗材时会自动暂停打印。这允许用户更换料盘并恢复打印，从而降低因耗材耗尽导致打印失败的风险。

## 防止耗材用尽的方法总结

* 在开始打印前称量料盘。
* 如果料盘耗材不足，在特定层高处添加暂停命令以便更换耗材。
* 根据所用材料的密度计算预计的耗材需求量。
* 利用耗材断料检测传感器，在耗材用尽时自动暂停打印。

{% embed url="<https://www.youtube.com/shorts/VlCyRilviSo>" %}


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/da-yin-ji-qiao/chang-jian-da-yin-wen-ti/running-out-of-filament.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
