> For the complete documentation index, see [llms.txt](https://wiki.polymaker.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/polymaker-chan-pin/geng-duo-guan-yu-wo-men-chan-pin-de-xin-xi/wen-dang/ji-shu-shu-ju-biao/pla/ht-pla-gf.md).

# HT-PLA-GF

[下载 TDS PDF](https://cdn.shopify.com/s/files/1/0548/7299/7945/files/Polymaker_HT-PLA-GF_TDS_EN_V1.1.pdf?v=1746635222)

Polymaker™ HT-PLA-GF 在退火后可提供类似 ABS 的耐热性，同时保持 PLA 易于打印的特性。它非常适合需要高热稳定性的应用，可承受机械应力和高达 130°C 的温度而不会软化或失效。

|      |                  |                     |
| ---- | ---------------- | ------------------- |
| 密度   | ISO1183，GB/T1033 | 23°C 时为 1.337 g/cm3 |
| 熔体指数 | 210°C, 2.16 kg   | 22.9 g/10min        |
| 透光率  | 不适用              | 不适用                 |
| 阻燃性  | 不适用              | 不适用                 |

|        |    |
| ------ | -- |
| 弱酸作用   | 良好 |
| 强酸作用   | 差  |
| 弱碱作用   | 一般 |
| 强碱作用   | 差  |
| 油和油脂作用 | 良好 |

注：

良好：材料在环境温度下与化学品长期接触后可能会受到轻微侵蚀

一般：材料可在室温下短时间接触化学品

差：材料在环境温度下接触化学品后会变得不稳定

![](https://web-api.textin.com/ocr_image/external/ea7e30a090cbfc27.jpg)

**环境性能**

| 属性   | 典型值 |
| ---- | --- |
| 水热老化 | 不适用 |
| 紫外老化 | 不适用 |

**尺寸稳定性**

| 属性       | 典型值   |
| -------- | ----- |
| 收缩率（X-Y） | 0.05% |
| 收缩率（Z）   | 0.05% |
| 收缩率（D）   | 0.10% |

**热性能**

| 属性      | 测试方法              | 典型值          |
| ------- | ----------------- | ------------ |
| 玻璃化转变温度 | DSC，10°C/$min     | 59.76°C      |
| 熔融温度    | DSC，10℃/min       | 174.87°C     |
| 结晶温度    | DSC，10℃/min       | 81.56°C      |
| 分解温度    | TGA，20℃/min       | 348.15°C     |
| 维卡软化温度  | ISO 306，GB/T 1633 | 148.9°C（打印后） |
| 热变形温度   | ISO 75 1.8MPa     | 59.7°C（打印后）  |
| 热变形温度   | ISO 75 0.45MPa    | 75.5°C（打印后）  |
| 维卡软化温度  | ISO 306，GB/T 1633 | 148.3°C（退火后） |
| 热变形温度   | ISO 75 1.8MPa     | 84°C（退火后）    |
| 热变形温度   | ISO 75 0.45MPa    | 114.7°C（退火后） |

### **机械性能（打印后）**

| 属性                       | 测试方法              | 典型值                |
| ------------------------ | ----------------- | ------------------ |
| 杨氏模量（X-Y）                | ISO 527，GB/T 1040 | 3793.85±129.17 MPa |
| 杨氏模量（Z）                  | ISO 527，GB/T 1040 | 3018.1±83.42 MPa   |
| 拉伸强度（X-Y）                | ISO 527，GB/T 1040 | 50.09±0.73 MPa     |
| 拉伸强度（Z）                  | ISO 527，GB/T 1040 | 23.68±1.28 MPa     |
| 断裂伸长率（X-Y）               | ISO 527，GB/T 1040 | 2.77±0.45 %        |
| 断裂伸长率（Z）                 | ISO 527，GB/T 1040 | 0.85±0.05 %        |
| 弯曲模量（X-Y）                | ISO 178，GB/T 9341 | 3684.87±115.49 MPa |
| 弯曲模量（Z）                  | ISO 178，GB/T 9341 | 2197.76±269.42 MPa |
| 弯曲强度（X-Y）                | ISO 178，GB/T 9341 | 86.41±1.38 MPa     |
| 弯曲强度（Z）                  | ISO 178，GB/T 9341 | 29.21±1.42 MPa     |
| <p>缺口夏比冲击<br>强度（X-Y）</p> | ISO 179，GB/T 1043 | 5.31±0.46 kJ/m2    |
| <p>缺口夏比冲击<br>强度（Z）</p>   | ISO 179，GB/T 1043 | 4.28±0.18 kJ/m2    |

### **机械性能（退火后）**

| 属性                       | 测试方法              | 典型值                |
| ------------------------ | ----------------- | ------------------ |
| 杨氏模量（X-Y）                | ISO 527，GB/T 1040 | 4206.91±182.01 MPa |
| 杨氏模量（Z）                  | ISO 527，GB/T 1040 | 3052.15±101.57 MPa |
| 拉伸强度（X-Y）                | ISO 527，GB/T 1040 | 50.2±0.93 MPa      |
| 拉伸强度（Z）                  | ISO 527，GB/T 1040 | 22.46±1.54 MPa     |
| 断裂伸长率（X-Y）               | ISO 527，GB/T 1040 | 2.3±0.2 %          |
| 断裂伸长率（Z）                 | ISO 527，GB/T 1040 | 0.79±0.07 %        |
| 弯曲模量（X-Y）                | ISO 178，GB/T 9341 | 3948.4±67.03 MPa   |
| 弯曲模量（Z）                  | ISO 178，GB/T 9341 | 1953.62±260.81 MPa |
| 弯曲强度（X-Y）                | ISO 178，GB/T 9341 | 87.76±1.96 MPa     |
| 弯曲强度（Z）                  | ISO 178，GB/T 9341 | 29.17±2.69 MPa     |
| <p>缺口夏比冲击<br>强度（X-Y）</p> | ISO 179，GB/T 1043 | 4.92±0.5 MPa       |
| <p>缺口夏比冲击<br>强度（Z）</p>   | ISO 179，GB/T 1043 | 4.37±0.27 MPa      |

\*基于 0.4 mm 喷嘴。打印条件可能因不同喷嘴直径而有所不同。

薄壁零件可能需要较低的退火温度以防止翘曲。

## 拉伸测试试样

ISO 527，GB/T 1040

![](https://web-api.textin.com/ocr_image/external/309d88e5883fce10.jpg)

![](https://web-api.textin.com/ocr_image/external/1238ecf75f9d7af7.jpg)

## 弯曲测试试样

ISO 178，GB/T 9341

![](https://web-api.textin.com/ocr_image/external/7d4c276bd3b67df3.jpg)

![](https://web-api.textin.com/ocr_image/external/6ba817935e7eedde.jpg)

## 冲击测试试样

ISO 179，GB/T 1043

![](https://web-api.textin.com/ocr_image/external/ff207e53afda9470.jpg)

![](https://web-api.textin.com/ocr_image/external/3a95a922695ba44f.jpg)

![](https://web-api.textin.com/ocr_image/external/50d597b6fa32f796.jpg)

## 如何制作试样

| 打印温度  | 230℃   |
| ----- | ------ |
| 热床温度  | 50℃    |
| 外壳    | 2      |
| 顶层和底层 | 3      |
| 填充    | $100%$ |
| 环境温度  | 环境温度   |
| 冷却风扇  | 开      |

### 免责声明：

本数据表中给出的典型值仅供参考和比较之用。它们不应用于设计规范或质量控制目的。实际值可能因打印条件而显著不同。打印部件的最终使用性能不仅取决于材料，还取决于零件设计、环境条件、打印条件等。产品规格如有更改，恕不另行通知。

每位用户都有责任确定 Polymaker 材料在其预期应用中的安全性、合法性、技术适用性以及处置/回收方式。除非另有单独声明，Polymaker 对任何用途或应用的适用性不作任何形式的保证。对于因在任何应用中使用 Polymaker 材料而导致的任何损坏、伤害或损失，Polymaker 概不承担责任。


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://wiki.polymaker.com/polymaker-wiki/polymaker-wiki-zh/polymaker-chan-pin/geng-duo-guan-yu-wo-men-chan-pin-de-xin-xi/wen-dang/ji-shu-shu-ju-biao/pla/ht-pla-gf.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
