Importing Profile into PrusaSlicer

• Make sure you have downloaded your profile files, which are usually in .ini, .gcode, or .3mf format. Extract the files if they come in a zip.

• Launch PrusaSlicer and look for the top menu bar.

• Click File, then select Import.

• If you are loading a single profile, choose Import Config. To bring in multiple profiles at once, use Import Config Bundle.

• For project files saved from PrusaSlicer (.3mf or .amf), select Import Config from Project.

• Browse to the location where your profile file is saved and select it. The profile may contain Print, Filament, and Printer settings.

• PrusaSlicer will import and add the new settings as custom profiles under the relevant section: Printer, Filament, or Print Settings.

• You should now see the imported custom profile in your lists. Select the new preset as needed for your print job.

• Always double-check that the settings match your machine and material to avoid accidental misconfiguration.

• If you download a profile with a .txt extension, rename it to .ini before importing.

• After importing, review the settings and, if needed, fine-tune for your particular application or printer.

This procedure supports importing profiles for a wide range of printers and materials, and keeps your settings organized for easy use and future reference.