PolyFlex™ TPU95-HF

Version 1.2

Issue date: 01/01/2023

Revision date: 01/01/2023

1. Product and Company Identification

Material name PolyFlex™ TPU95-HF

CAS # See section 3

Product code -

Product use 3D Printing Filament

Manufacturer/Supplier

Supplier(Manufacturer): JF Polymers (Suzhou) Co., Ltd.

Address: Building 6&7&11, No.2, Hai Cheng Road, Chang Shu Economic &Technological

Development Zone, 215513, People’s Republic of China

Contact person(E-mail): zhenxing.miao@polymaker.com

Telephone: +86-512-52058005

Fax: -

Emergency telephone Number: +86-512-52058005

2. Hazards identification

GHS classification

Physical hazards deifissalc toN

Health hazards deifissalc toN

Environmental hazards deifissalc toN

GHS label elements

Hazard Pictograms No hazard pictogram is used.

Signal word No signal word is used.

Hazard statement Not applicable.

Precautionary statement

Prevention Not applicable.

Response Not applicable.

Storage Not applicable.

Disposal Not applicable.

Other hazards Not available.

3. Composition / Information on Ingredients

This product does not contain hazardous ingredients above cut-off value according to HCS2012.

4. First Aid Measures

First aid procedures

Eye contact None expected to require first aid measures. Flush with running water for at least

15 minutes. If irritation persists get medical attention.

Skin contact None expected to require first aid measures. Wash thoroughly with soap and water.Get medical attention in the unlikely event that irritation persists.

Inhalation

None expected to require first aid measures. If breathed in, remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical attention.

Ingestion Immediate first aid is not likely to be required. A physician or poison control center can be contacted for advice.

Notes to physician Treat symptoms.

1. Fire Fighting Measure

Flammable properties Not available.

Extinguishing media

Suitable extinguishing media Use extinguishers suitable for surrounding fire.

Unsuitable extinguishing media Not available.

Firefighting equipment/instructions Wear self contained breathing apparatus for fire fighting if necessary.

Hazardous combustion products Carbon oxides.

1. Accidental Release Measures

Personal precautions Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas.

Environmental precautions Avoid disposing into drainage/sewer system or directly into the aquatic environment.

Methods for cleaning up Sweep up and shovel into suitable containers. Clean up affected area.

1. Handling and Storage

Handling Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.

Storage Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

Containers which are opened must be carefully resealed and kept upright to prevent leakage.

8. Exposure Controls / Personal Protection

Occupational exposure limits Country specific exposure limits have not been established or are not applicable Biological limit values No biological exposure limits noted for the ingredient(s).

Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Individual protection measures, such as personal protective equipment:

Eye / face protection Safety glasses with side-shields

Skin protection No special skin protection requirements during normal handling and use.

Respiratory protection general dilution or local exhaust ventilation

General hygiene Wash hands, forearms and face thoroughly after handlingchemical products,

considerations before eating, smoking and usingthe lavatory and at the end of the working period.

9. Physical & Chemical Properties

Appearance

Physical state Solid

Form Solid

Color Various

Odor Odorless

Odor threshold Not available

pH Not available

Vapor pressure Not available

Vapor density Not available

Boiling point Not available

Melting point/Freezing point Not available

Solubility (water) Insoluble

Material name:PolyFlex™ TPU95-HF SDS US

Version #:1.2Revision date: 01-01-2023. Issue date: 01-01-2023. 2 / 5

Relative Density 1.18-1.23

Flash point Not available

Partition coefficient Not available

Flammability limits in air, upper, %by volume Not available

Flammability limits in air, lower, % by volume Not available

Auto-ignition temperature Not available

VOC Not available

Percent volatile Not available

Molecular Formula Not available

Molecular Weight Not available

Other data

Viscosity Not available

Dissociation constant Not available

10. Chemical Stability & Reactivity Information

Reactivity The substance is stable under normal storage and handling conditions.

Chemical stability Material is stable under normal conditions.

Conditions to avoid Incompatible materials.

Incompatible materials Strong oxidizing agents.

Hazardous decomposition products Carbon oxides 4,4'-Diphenylmethane Diisocyanate (MDI)

Possibility of hazardous reactions No hazardous reactions known.

11. Toxicological Information

Toxicokinetics, metabolism and distribution:

Non-human toxicological data: Not available

Information on toxicological effects:

Acute toxicity:

LD50(Oral, Rat): Not available

LD50(Dermal, Rabbit): Not available

LC50(Inhalation, Rat): Not available

Skin corrosion/Irritation: Not classified

Serious eye damage/irritation: Not classified

Respiratory or skin sensitization: Not classified

Germ cell mutagenicity: Not classified

Carcinogenicity: Not classified

Reproductive toxicity: Not classified

STOT- single exposure: Not classified

STOT-repeated exposure: Not classified

Aspiration hazard: Not classified

12. Ecological Information

Toxicity:

Persistence and degradability: Not available.

Bioaccumulative potential: Not available.

Material name:PolyFlex™ TPU95-HF

Version #:1.2Revision date: 01-01-2023.

Mobility in soil: Not available.

Results of PBT&vPvB assessment: Not available.

Other adverse effects: Not available.

13. Disposal Considerations

Disposal instructions Dispose of contents/container in accordance with

local/regional/national/international regulations.

Contaminated packaging Since emptied containers may retain product residue, follow label warnings even

after container is emptied.

14. Transport Information

DOT

Basic shipping requirements:

UN number Not regulated

Proper shipping name Not regulated

Hazard class Not regulated

Packing group Not regulated

Environmental hazards No

IATA

UN number Not regulated

UN proper shipping name Not regulated

Transport hazard class(es) Not regulated

Packing group Not regulated

Environmental hazards No

IMDG

UN number Not regulated

UN proper shipping name Not regulated

Transport hazard class(es) Not regulated

Packing group Not regulated

Environmental hazards No

1. Regulatory Information

US federal regulations

Toxic Substances Control Act (TSCA)

TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)

.detaluger toN

CERCLA Hazardous Substance List (40 CFR 302.4)

.detsil toN

SARA 304 Emergency release notification

.detaluger toN

OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)

.detaluger toN

Superfund Amendments and Reauthorization Act of 1986 (SARA)

SARA 302 Extremely hazardous substance

Not listed.

SARA 311/312 Hazardous chemical No

SARA 313 (TRI reporting)

.detaluger toN

Other federal regulations

Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List

Not regulated.

Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)

Not regulated.

Safe Drinking Water Act (SDWA) Not regulated.

16. Other Information

HMIS®ratings Health: 0

Flammability: 1

Physical hazard: 0

NFPA ratings Health: 0

Flammability: 1

Instability: 0

Disclaimer The information in the sheet was written based on the best knowledge and

experience currently available.

Issue date 07-29-2019

Author:Hangzhou C&K Testing Technic Co.,Ltd Website:www.cirs-ck.com Tel:0571-89900715 Email:test@cirs-group.com