CosPLA™
Last updated
Was this helpful?
Last updated
Was this helpful?
Version 1.0
Issue date: 01/01/2023
Revision date: 01/01/2023
Material name: PolyLite™ CosPLA
Names: Other
Recommended use: 3D Printing Filament
Manufacturer:
Supplier(Manufacturer): JF Polymers (Suzhou) Co., Ltd.
Address: 7-1 Xinggang Rd, Chang Shu Economic & Technological Development
Zone, 215513, People's Republic of China
Contact person(E-mail): zhenxing.miao@polymaker.com
Telephone: 0086-512-52058005
Fax:
Emergency number: 0086-512-52058005
Importer:
Company name:
Address:
Contact person(E-mail):
Telephone:
Fax:
Emergency number:
GHS classification:
Physical hazards: Not classified
Health hazards: Not classified
Environmental hazards: Not classified
GHS label elements:
Hazard Pictograms: : No hazard pictogram is used.
Signal word: No signal word is used.
Hazard statement: Not applicable.
Precautionary statement:
Prevention: Not applicable.
Response: Not applicable.
Storage: Not applicable.
Disposal: Not applicable.
Specific hazards: Not applicable.
Components
CAS No.
Percent
Poly(lactic acid)
26100-51-6
>60%
4.First aid measures
Material Name: PolyLite™ CosPLA Issue Date: 01-01-2023. Revision date: 01-01-2023.SOS AUSTRLIA
Version#: 1.0
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Skin: Wash off with soap and plenty of water.
Eye: Immediately flush eyes with plenty of water, lifting upper and lower eyelids
occasionally. Get medical attention if irritation persists.
Ingestion: If large amounts were swallowed, get medical advice.
Notes to physician: Treat symptomatically.
Suitable extinguishing media: U se extinguishing measures that are appropriate to local circumstances and the
surrounding environment.
Extinguishing media which must not be Not available.
used for safety reasons:
Specific hazards arising from the No specific fire or explosion hazard. chemical:
Fire Fighting:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode. None.
HACHEM code
Personal precautions: Avoid dust formation.
Containment procedures: Do not let product enter drains.
Methods for cleaning up: Sweep up and shovel. Keep in suitable, closed and properly labelled containers for disposal.
7.Handling and storage
Precautions for safe handling: Provide appropriate exhaust ventilation at places where dust is formed.
Storage: Keep container closed in a cool, dry place.
Control parameters Follow standard monitoring procedures
Occupational exposure limits No exposure limits noted for ingredient(s).
Biological limit values: No biological exposure limits noted for the ingredient(s).
Exposure guidelines No exposure standards allocated.
Appropriate engineering controls: Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.
Personal protective equipment:
Eye/face protection: Safety goggles.
Skin protection: Wear protective clothing.
Respirator protection: Use with adequate ventilation. In case of insufficient local exhaust ventilation, wear protective mask.
Hand protection: Wear protective gloves.
Appearance:
Physical state: Solid
Form: Solid
Color: Various
Odor: Not available
Odor threshold: Not available
Material Name: PolyLite™ CosPLA Issue Date: 01-01-2023. Revision date: 01-01-2023. SDS AUSTRALIA
Version#: 1.0 2/6
PH: Not available
Melting point/Freezing point: 170°C
Initial boiling point and boiling range: Not available
Flash point: Not available
Evaporation rate: Not available
Flammability (solid, gas) : Not available
Upper/lower flammability or explosive Not available
limits:
Vapor pressure: Not available
Vapor density: Not available
Density: Not available
Solubility (H心): Insoluble
Partition coefficient (n-octanol/water) : Not available
Auto-ignition temperature: Not available
Decompos巾on temperature: Not available
Viscosity, dynamic: Not available
Organic solvents: Not available
Water: Not available
voe (EC) : Not available
Solids contents: Not available
Molecular Formula: Not available
Molecular Weight: Not available
Reactivity: The substance is stable under normal storage and handling conditions.
Chemical stability: Stable at rom temperature in closed containers under normal storage and handling conditions.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: Incompatible materials.
Incompatible materials: Strong oxidizing agents
Hazardous decomposition products: Carbon oxides.
Toxicological data:
Acute toxicity:
LDSO(Oral, Rat): Not available
LDSO(Dermal, Rabbit): Not available
LCSO(inhalation, Rat): Not available
Skin corrosion/Irritation: No data available.
Serious eye damage/irritation: No data available.
Respiratory or skin sensitization: No data available.
Germ cell mutagenicity: No data available.
Carcinogenicity: No data available.
Reproductive toxicity: No data available.
STOT- single exposure: No data available.
STOT-repeated exposure: No data available.
Aspiration hazard: No data available.
Other information This product has no known adverse effect on human health.
Toxicity:
LC50
N/A
96h
Fish
OECD 203
N/A
N/A
EC50
N/A
48h
Daphnia
OECD 202
N/A
N/A
EC50
N/A
72h
Algae
OECD 201
N/A
N/A
Persistence and degradability: Not available.
Bio accumulative potential: Not available.
Mobility in soil: Not available.
Other adverse effects:
No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component.
13.Disposal considerations
Disposal methods: Collect and reclaim or dispose in sealed containers at licensed waste disposal site.
Waste from residues/unused product:
Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions).
Contaminated packaging:
Empty containers should be taken to an approved waste handling site fr recycling or disposal. Since emptied containers may retain product residue, follow label warnings even after container is emptied.
ADG
UN number Not regulated
Proper shipping name Not regulated
Hazard class Not regulated
Packing group Not regulated
Labels required Not regulated
Special precautions Read safety instructions, SDS and emergency procedures before handling.
IATA
UN number Not regulated
Proper shipping name Not regulated
Hazard class Not regulated
Packing group Not regulated
Special precautions Read safety instructions, SDS and emergency procedures before handling.
IMDG
UN number Not regulated
Proper shipping name Not regulated
Hazard class Not regulated
Packing group Not regulated
Environmental hazards
Marine pollutant No
Special precautions Read safety instructions, SDS and emergency procedures before handling.
Transport in bulk according to Annex II Not regulated
of MARPOL 73/78 and the IBC Code:
Safety, health and environmental regulations
National regulations This Safety Data Sheet was prepared in accordance with Australia Model Code of Practice for
the preparation of Safety Data Sheets for Hazardous Chemicals (23/12/2011). Additional information is given in the Safety Data Sheet.
Australia Medicines & Poisons Appendix AB/D-K / Australia Medicines & Poisons Schedule 2/3/5-10
Poisons schedule number not allocated.
Australia Medicines & Poisons Schedule 4
Poly(lactic acid) (CAS 26100-51-6)
High Volume Industrial Chemicals (HVIC)
Not listed.
Importation of Ozone Deleting Substances (Customs(Prohibited impors) Regulations 1956, Schedule 10)
Not listed.
National Pollutant Inventor (NPI) substance reporting list
Not listed.
Prohibited Carcinogenic Substances
Not regulated.
Prohibited Substances (National Model Regulation for the control of Workplace Hazardous Substances, Schedule 2
NOHSC:1005 (1994) as amended)
Not listed.
Restricted Importation of Organochlorine Chemicals (Customs(Prohibited Impors) Regulations 1956, Schedule 9) Not listed.
Restricted Carcinogenic Substances
Not regulated.
International regulations
Stockholm Convention
Not applicable
Rotterdam Convention
Not applicable.
Kyoto protocol
Not applicable.
Montreal Protocol
Not applicable.
Basel Convention
Not applicable.
Inventor status:
Countr(s) or region Inventor name On inventor
(yes/no)*
Australia Australian Inventory of Chemical Substances (AICS) Not available
Canada Domestic /Non-Domestic Substances List (DSL} /(NDSL} Not available
China Inventory of Existing Chemical Substances in China (IECSC) Not available
Europe European Inventory of Existing Commercial/ Notified Chemical Substances Not available (EINECS) / (ELINCS)
Japan Inventory of Existing and New Chemical Substances (ENCS) Not available
Korea Existing Chemicals List (ECL} Not available
New Zealand New Zealand Inventory Not available
Philippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) Not available
United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Not available
*A "Yes" indicates this product complies with the inventory requirements administered by the governing country(s)
A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s).
16.0ther information
Indication of changes: Version 1.0
Training instructions: Not applicable.
Further information: This information is based upon the present state of our knowledge. This SDS has been compiled and is solely intended for this product.
Declare to reader:
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.