LogoLogo
Polymaker.comMaterial PropertiesFilament GuidePanchromaFiberon
  • Welcome to Polymaker!
  • The Basics
    • Introduction to 3D Printing
      • FAQ
      • Good Practices
      • Find Your Filament
      • Glossary of Terminology
    • 3D Printing Materials
      • PLA
      • PETG
      • PET
      • ABS
      • ASA
      • TPU
      • PA
      • PC
      • PP
      • PPS
      • Carbon Fiber Reinforced Filaments
    • 3D Printers
      • Diagram of a 3D Printer
        • Extruders
        • Nozzles
        • Build Plates
      • Maintenance
      • Acessories and Replacements
      • Quality Options
      • Resin Printing
    • 3D Slicers
      • Slicer Software Options
      • Quality (Layer Height)
      • Printing Temperature
      • Build Plate Temperature
      • Printing Speeds
      • Shell Walls
      • Infil
      • Top/Bottom Layers
      • Travel and Retraction
      • Cooling
      • Support Structures
    • Applications
      • Protoyping
      • Toys and Fun Gadets
      • Cosplay and Props
      • Custom Printers
      • Hueforge Painting
      • Automotive
      • Drones and RC Planes
      • Light Boxes
      • Robotics
      • Custom Tooling
    • Fun 3D Printing Facts
      • Airflow Is More Important than Heat when Drying
      • Combining Materials to Make Composites
      • Extrusion Temp ≠ Printing Temp
      • No Material is FDA Approved as Food Safe
      • PLA Can Be Weather Resistant
      • Print Orientation Affects Strength
      • Printing Fast = Matte Surface Finish
      • Standard PLA is Actually Strong
  • Printing Tips
    • By Material Type
      • Test Prints
    • Common Printing Issues
      • Black Spots on Print
      • Blobs and Oozing
      • Curling of Layers and Angles
      • Elephant Foot (Smooshed First Layer)
      • Extruder Motor Skipping/ Nozzle Clogs
      • Ghosting (Echo/Ringing Effect)
      • Hairy or Stringy Prints
      • Layer Bulges
      • Layer Shifts
      • Missing Layers and Holes in Prints
      • Poor Layer Adhesion
      • Print Not Sticking to Build Plate
      • Running Out Of Filament
      • Ugly Tops of Prints or Ugly Thin Prints
      • Warping
      • Z-Axis Wobble
    • Post-Processing
      • Moisture Conditioning
      • Annealing
      • Glueing
      • Sanding
      • Smoothing
      • Painting
    • Material Science
      • What are Polymers?
      • Temperature and Polymers
      • Warping
      • Oozing
      • Overhangs
      • Strength Testing
  • Polymaker Products
    • About Polymaker
      • Polymaker's Technologies
      • Polymaker FAQ
      • Basic Tips for Polymaker Material
      • Sustainability
    • Polymaker Filaments
      • Prime Materials
        • Functional PLA
          • PolyLite™ PLA
          • PLA Pro
          • PolyMax PLA
          • LW-PLA
          • PLA-CF
          • Draft PLA
          • Matte PLA for Production
          • HT-PLA
          • HT-PLA-GF
        • PETG
          • PolyLite PETG
          • PolyMax PETG
        • ABS and ASA
          • Polymaker ABS
          • Polymaker ASA
        • Flexible TPU
          • PolyFlex™ TPU90
          • PolyFlex™ TPU95
          • PolyFlex™ TPU95-HF
        • Polycarbonate
          • PolyLite™ PC
          • PolyMax™ PC
          • PolyMax™ PC-FR
          • Polymaker PC-ABS
          • Polymaker PC-PBT
        • Nylon (PA)
          • PolyMide™ CoPA
      • Panchroma™
        • Panchroma™ Matte PLA
        • Panchroma™ Satin PLA
        • Panchroma™ Silk PLA
        • Panchroma™ Translucent PLA
        • Panchroma™ Starlight PLA
        • Panchroma™ Celestial PLA
        • Panchroma™ Metallic PLA
        • Panchroma™ Galaxy PLA
        • Panchroma™ Marble PLA
        • Panchroma™ Luminous PLA
        • Panchroma™ Glow PLA
        • Panchroma™ Neon PLA
        • Panchroma™ UV Shift PLA
        • Panchroma™ Dual Matte PLA
        • Panchroma™ Dual Silk PLA
        • Panchroma™ Dual Special PLA
        • Panchroma™ CoPE
      • Fiberon™
        • Fiberon™ PPS-CF10
        • Fiberon™ PET-CF17
        • Fiberon™ PA6-CF20
        • Fiberon™ PA6-GF25
        • Fiberon™ PA612-CF15
        • Fiberon™ PA12-CF10
        • Fiberon™ PETG-rCF08
        • Fiberon™ PETG-ESD
      • Specialty Filament
        • CosPLA
        • PolySmooth™ (PVB)
        • PolyCast™ (PVB)
        • PolySupport™ for PLA
        • PolySupport™ for PA12
        • PolyDissolve™ S1
    • Printer Profiles
      • PLA
        • PolyLite™ PLA
        • PLA Pro
        • PolyMax™ PLA
        • CosPLA
        • LW-PLA
        • PLA-CF
        • Panchroma™ Matte
        • Panchroma™ Satin
        • Panchroma™ Silk
        • Panchroma™ Others
        • HT-PLA
        • HT-PLA-GF
      • PET/PETG
        • PolyLite™ PETG
        • PolyMax™ PETG
        • Fiberon™ PET-CF17
        • Fiberon™ PETG-rCF08
        • Fiberon™ PETG-ESD
      • ABS/ASA
        • Polymaker ABS
        • Polymaker ASA
      • TPU
        • PolyFlex™ TPU90
        • PolyFlex™ TPU95
        • PolyFlex™ TPU95-HF
      • Polycarbonate
        • PolyLite™ PC
        • PolyMax™ PC
        • PolyMax™ PC-FR
        • Polymaker PC-ABS
      • Nylon (PA)
        • CoPA
        • Fiberon™ PA612-CF15
        • Fiberon™ PA6-CF20
        • Fiberon™ PA6-GF25
        • Fiberon™ PA12-CF10
      • PPS
        • Fiberon™ PPS-CF10
      • Specialty
        • Panchroma™ CoPE
        • PolySmooth™
        • PolyCast™
      • Support
        • PolySupport™ for PLA
        • PolySupport™ for PA12
        • PolyDissolve™ S1 (PVA)
    • Accessories
      • PolyDryer™
      • Polysher™
      • PolyBox™
    • PolyCore™ Pellets
      • Products
        • PolyCore™ PC-7413
        • PolyCore™ ASA-3000
        • PolyCore™ ASA-3012
        • PolyCore™ ABS-5012
        • PolyCore™ ABS-5022
        • PolyCore™ PETG-1000
        • PolyCore™ PETG-1013
        • PolyCore™ PETG-1211
        • PolyCore™ TPU-2000
      • Applications
        • Architecture
        • Indoor Decoration
        • Mold and Tooling
    • More About Our Products
      • Documents
        • Certifications and Declarations
        • Technical Data Sheets
          • PLA
            • PolyLite™ PLA
            • PolyLite™ PLA Pro
            • PolyMax™ PLA
            • CosPLA™
            • LW-PLA
            • PLA-CF
            • Draft PLA
            • Panchroma™ PLA
            • HT-PLA
            • HT-PLA-GF
          • PETG/PET
            • PolyLite™ PETG
            • PolyMax™ PETG
            • Fiberon™ PETG-rCF08
            • Fiberon™ PETG-ESD
            • Fiberon™ PET-CF17
          • ABS/ASA
            • PolyLite™ ABS
            • PolyLite™ ASA
          • TPU
            • PolyFlex™ TPU90
            • PolyFlex™ TPU95
            • PolyFlex™ TPU95-HF
          • Nylon
            • PolyMide™ CoPA
            • Fiberon™ PA6-CF20
            • Fiberon™ PA6-GF25
            • Fiberon™ PA612-CF15
            • Fiberon™ PA12-CF10
          • Polycarbonate
            • PolyLite™ PC
            • PolyMax™ PC
            • PolyMax™ PC-FR
            • Polymaker PC-ABS
            • Polymaker PC-PBT
          • Specialty & Support Materials
            • PolySmooth™
            • PolyCast™
            • PolySupport™ for PLA
            • PolySupport™ for PA12
            • PolyDissolve™ S1
          • PPS
            • Fiberon™ PPS-CF10
        • Safety Data Sheets
          • PLA
            • Panchroma™ PLA
            • PolyLite™ PLA
            • PolyLite™ PLA Pro
            • PolyMax™ PLA
            • CosPLA™
            • LW-PLA
            • PLA-CF
            • Draft PLA
            • HT-PLA
            • HT-PLA-GF
          • PETG/PET
            • PolyLite™ PETG
            • PolyMax™ PETG
            • Fiberon™ PETG-rCF08
            • Fiberon™ PETG-ESD
            • Fiberon™ PET-CF17
          • ABS/ASA
            • PolyLite™ ABS
            • PolyLite™ ASA
          • TPU
            • PolyFlex™ TPU90
            • PolyFlex™ TPU95
            • PolyFlex™ TPU95-HF
          • Nylon
            • PolyMide™ CoPA
            • Fiberon™ PA612-CF15
            • Fiberon™ PA6-CF20
            • Fiberon™ PA6-GF25
            • Fiberon™ PA12-CF10
          • Polycarbonate
            • PolyLite™ PC
            • PolyMax™ PC
            • PolyMax™ PC-FR
            • Polymaker PC-ABS
            • Polymaker PC-PBT
          • Specialty & Support Materials
            • PolySmooth™
            • PolyCast™
            • PolySupport™ for PLA
            • PolySupport™ for PA12
            • PolyDissolve™ S1
          • PPS
            • Fiberon™ PPS-CF10
      • Product Changelog
      • HEX Codes and Transmission Distances
  • Order Help
    • US and Canada
      • My Product is Not Performing as Expected
      • Order and Shipping Inquiries
      • Ordering Wholesale
      • Made in America Materials
      • Order FAQ
  • Rest of World
    • My Product is Not Performing as Expected
    • Ordering Filament
Powered by GitBook
LogoLogo

Shop

  • US Shop
  • Canada Shop
  • US Wholesale
  • EU Wholesale
  • Find a Reseller

Our Products

  • Prime Materials
  • Fiberon
  • Panchroma
  • Hardware
  • PolyCore Pellets

About Us

  • Contact Us
  • Company
  • Awards
  • News & Events
  • Career

More Links

  • New? Start Here!
  • Material App
  • Filament Guide
  • Join our Discord
  • All of our Links

©Polymaker

On this page
  • Version 1.0
  • 1.Identification
  • 2.Hazard(s) identification
  • 4.First-aid Measures
  • 5. Fire-fighting measures
  • 8.Exposure controls / personal protection
  • 9.Physical and chemical properties
  • 10. Stability and reactivity
  • 11. Toxicological information
  • 12.Ecological information
  • 13. Disposal considerations
  • 14. Transport information
  • 15.Regulatory information

Was this helpful?

Export as PDF
  1. Polymaker Products
  2. More About Our Products
  3. Documents
  4. Safety Data Sheets
  5. Specialty & Support Materials

PolyDissolve™ S1

PreviousPolySupport™ for PA12NextPPS

Last updated 3 months ago

Was this helpful?

Version 1.0

Issue date: 04/08/2019

Revision date: 04/08/2019 SDS record number: CSSS-TCO-010-130553

1.Identification

Product name

Synonyms

CAS #

Product code

Product use

Manufacturer/Supplier

Supplier(Manufacturer):

Address:

Contact person(E-mail):

Telephone:

Fax:

Emergency telephone Number:

2.Hazard(s) identification

GHS classification

Physical hazards

Health hazards

Environmental hazards

GHS label elements

Hazard Pictograms

Signal word

Hazard statement

Precautionary statement

Prevention

Response

Storage

Disposal

  1. Composition / information on ingredients

PolyDissolve TM S1

See section 3

3D Printing Filament.

JF Polymers(Suzhou) Co., Ltd.

Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ), Changshu, Jiangsu Province 215513, China

zhenggang.cai@polymaker.com

+86-512-52058005

+86-512-52058005

Not classified

Eye damage/irritation Category 2A

Not classified

Warning

Causes serious eye irritation

Wash hands thoroughly after handling.

Wear protective gloves/protective clothing/eye protection/face protection.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

If eye irritation persists: Get medical advice/attention.

Not applicable.

Not applicable.

Components
CAS#
Percent

Poly(vinyl alcohol)

25213-24-5

>80%

4.First-aid Measures

First aid procedures

Eye contact Immediately flush eyes with penty of water. If easy to do, contact lenses should

Skin contact

Inhalation

Ingestion

Notes to physician

5. Fire-fighting measures

Flammable properties

Extinguishing media

Suitable extinguishing media

Unsuitable extinguishing media

Firefighting equipment/instructions

Hazardous combustion products

  1. Accidental release measures

Personal precautions

Environmental precautions

Methods for cleaning up

7.Handling and storage

Handling

Storage

be removed during the flushing, by trained personnel. Occasionally hold the eyelids apart during the flushing to ensure rinsing the entire surface of the eye and lids with water. Get medical attention if irritation persists.

Wash thoroughly using copious water- remove contaminated clothing immediately.If skin irritation occurs (redness etc.), consult doctor.

Remove person from danger area. Supply person with fresh air and consult doctor according to symptoms.

Never give anything by mouth to an unconscious person. Rinse mouth with water.Consult a physician.

Treat symptoms.

Not available.

Use extinguishing agents appropriate for surrounding fire.

Not available.

In caseof fire and/or explosion do not breathe fumes.Protective respirator with independent air supply. According to size of fire Full protection,if necessary.Dispose of contaminated extinction water according to official regulations.

Oxides of carbon and other toxic fumes.

Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. For personal protection see section 8.

Do not let large amount of product enter drains.

Sweep up and shovel. Keep in suitable, closed and properly labelled containers for disposal.

Avoid contact with skin and eyes. Keep away from sources of ignition - No smoking. Take measures to prevent the build up of electrostatic charge.

Keep container tightly closed in a dry and well-ventilated place.Store away from incompatible materials.

8.Exposure controls / personal protection

Control parameters:

Occupational exposure limits

US. Workplace Environmental Exposure Level (WEEL) Guides

Appropriate engineering controls: Use in a well-ventilated area.

Individual protection measures, such as personal protective equipment:

Eye/face protection Chemical safety goggles.

Skin protection Wear suitable protective clothing to prevent skin exposure

Respiratory protection Suitable respiratory protective device recommended.

General hygiene

considerations

Wash hands,forearms and face thoroughly after handling chemical products,before eating,smoking and using the lavatory and at the end of the working period. Keep away from foodstuffs,beverages and feed. Immediately remove all soiled and contaminated clothing.

9.Physical and chemical properties

Appearance

Physical state Solid

Form Solid

Color White translucent

Odor Not available

Odor threshold Not available

pH Not available

Vapor pressure Not available

Melting point/Freezing point 178℃

initial boiling point and boiling range Not available

Flash point Not available

Evaporation rate Not available

Flammability (solid, gas) Not available

Explosion limits Not available

Vapor density Not available

Relative density 1.08

Solubility (water) Soluble

Partition coefficient Not available

Auto-ignition temperature Not available

Decomposition temperature Not available

Specific gravity Not available

Flammability limits in air, upper,%by volume Not available

Flammability limits in air, lower,% by volume Not available

VOC Not available

Percent volatile Not available

Other data

Viscosity Not available

10. Stability and reactivity

Chemical stability Material is stable under normal conditions.

Conditions to avoid Incompatible materials. Strong heat.

Incompatible materials Avoid contact with other chemicals, oxidizing agents, strong alkalis and strong acids.

Hazardous decomposition products Oxides of carbon and other toxic fumes.

Possibility of hazardous reactions No dangerous reactions known.

11. Toxicological information

Toxicokinetics, metabolism and distribution:

Non-human toxicological data: Not available

Information on toxicological effects:

Acute toxicity:

LD50(Oral, Rat): Not available

LD50(Dermal, Rabbit): Not available

LC50(Inhalation, Rat): Not available

Skin corrosion/lrritation: Not classified

Serious eye damage/irritation: Causes serious eye irritation

Respiratory or skin sensitization: Not classified

Germ cell mutagenicity: Not classified

Carcinogenicity: Not classified

Reproductive toxicity: Not classified

STOT-single exposure: Not classified

STOT-repeated exposure: Not classified

Aspiration hazard: Not classified

12.Ecological information

Toxicity:

Acute toxicity
Acute toxicity
Time
Species
Method
Evaluation
Remarks

LC50

N/A

96h

Fish

OECD 203

N/A

N/A

LC50

N/A

48h

Daphnia

OECD 202

N/A

N/A

EC50

N/A

72h

Algae

OECD 201

N/A

N/A

Persistence and degradability: Not available.

Bioaccumulative potential: Not available.

Mobility in soil: Not available.

Results of PBT&vPvB assessment: Not available.

Other adverse effects: No known significant effects or critical hazards.

13. Disposal considerations

Disposal instructions Dispose of contents/container in accordance with

local/regional/national/international regulations.

Contaminated packaging Since emptied containers may retain product residue, follow label warnings even after container is emptied.

14. Transport information

DOT

Basic shipping requirements:

UN number Not regulated

Proper shipping name Not regulated

Hazard class Not regulated

Packing group Not regulated

Environmental hazards No

IATA

UN number Not regulated

UN proper shipping name Not regulated

Transport hazard class(es) Not regulated

Packing group Not regulated

Environmental hazards No

IMDG

UN number Not regulated

UN proper shipping name Not regulated

Transport hazard class(es) Not regulated

Packing group Not regulated

Environmental hazards No

15.Regulatory information

US federal regulations

Toxic Substances Control Act (TSCA)

TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)

Not regulated.

CERCLA Hazardous Substance List (40 CFR 302.4)

Not listed.

SARA 304 Emergency release notification

Not regulated.

OSHA Specifically Regulated Substances (29 CFR 1910.1001-1052)

Not regulated.

Superfund Amendments and Reauthorization Act of 1986 (SARA)

SARA 302 Extremely hazardous substance

Not listed.

SARA 311/312 Hazardous chemical No

SARA 313 (TRI reporting) Not regulated.

Other federal regulations

Clean Air Act(CAA) Section 112 Hazardous Air Pollutants (HAPs) List

Not regulated.

Clean Air Act(CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)Not regulated.

Safe Drinking Water Act (SDWA) Not regulated.

16.Other information, including date of preparation or last revision

HMIS®ratings Health: 1

Flammability:1

Physical hazard:0

NFPA ratings Health: 1

Flammability:1

Instability:0

Disclaimer The information in the st ee was written papergr he best knomerge and

experience currently ava able.

Issue date 04-08-2019

Author: Hangzhou C&K Testing Technic Co.,Ltd Website:www.cirs-ck.com Tel:0571-89900715 Email:test@cir-group.com

2MB
PolyDissolve_S1_SDS_US_EN_V1.1.pdf
pdf