LogoLogo
Polymaker.comMaterial PropertiesFilament GuidePanchromaFiberon
  • Welcome to Polymaker!
  • The Basics
    • Introduction to 3D Printing
      • FAQ
      • Good Practices
      • Find Your Filament
      • Glossary of Terminology
    • 3D Printing Materials
      • PLA
      • PETG
      • PET
      • ABS
      • ASA
      • TPU
      • PA
      • PC
      • PP
      • PPS
      • Carbon Fiber Reinforced Filaments
    • 3D Printers
      • Diagram of a 3D Printer
        • Extruders
        • Nozzles
        • Build Plates
      • Maintenance
      • Acessories and Replacements
      • Quality Options
      • Resin Printing
    • 3D Slicers
      • Slicer Software Options
      • Quality (Layer Height)
      • Printing Temperature
      • Build Plate Temperature
      • Printing Speeds
      • Shell Walls
      • Infil
      • Top/Bottom Layers
      • Travel and Retraction
      • Cooling
      • Support Structures
    • Applications
      • Protoyping
      • Toys and Fun Gadets
      • Cosplay and Props
      • Custom Printers
      • Hueforge Painting
      • Automotive
      • Drones and RC Planes
      • Light Boxes
      • Robotics
      • Custom Tooling
    • Fun 3D Printing Facts
      • Airflow Is More Important than Heat when Drying
      • Combining Materials to Make Composites
      • Extrusion Temp ≠ Printing Temp
      • No Material is FDA Approved as Food Safe
      • PLA Can Be Weather Resistant
      • Print Orientation Affects Strength
      • Printing Fast = Matte Surface Finish
      • Standard PLA is Actually Strong
  • Printing Tips
    • By Material Type
      • Test Prints
    • Common Printing Issues
      • Black Spots on Print
      • Blobs and Oozing
      • Curling of Layers and Angles
      • Elephant Foot (Smooshed First Layer)
      • Extruder Motor Skipping/ Nozzle Clogs
      • Ghosting (Echo/Ringing Effect)
      • Hairy or Stringy Prints
      • Layer Bulges
      • Layer Shifts
      • Missing Layers and Holes in Prints
      • Poor Layer Adhesion
      • Print Not Sticking to Build Plate
      • Running Out Of Filament
      • Ugly Tops of Prints or Ugly Thin Prints
      • Warping
      • Z-Axis Wobble
    • Post-Processing
      • Moisture Conditioning
      • Annealing
      • Glueing
      • Sanding
      • Smoothing
      • Painting
    • Material Science
      • What are Polymers?
      • Temperature and Polymers
      • Warping
      • Oozing
      • Overhangs
      • Strength Testing
  • Polymaker Products
    • About Polymaker
      • Polymaker's Technologies
      • Polymaker FAQ
      • Basic Tips for Polymaker Material
      • Sustainability
    • Polymaker Filaments
      • Prime Materials
        • Functional PLA
          • PolyLite™ PLA
          • PLA Pro
          • PolyMax PLA
          • LW-PLA
          • PLA-CF
          • Draft PLA
          • Matte PLA for Production
          • HT-PLA
          • HT-PLA-GF
        • PETG
          • PolyLite PETG
          • PolyMax PETG
        • ABS and ASA
          • Polymaker ABS
          • Polymaker ASA
        • Flexible TPU
          • PolyFlex™ TPU90
          • PolyFlex™ TPU95
          • PolyFlex™ TPU95-HF
        • Polycarbonate
          • PolyLite™ PC
          • PolyMax™ PC
          • PolyMax™ PC-FR
          • Polymaker PC-ABS
          • Polymaker PC-PBT
        • Nylon (PA)
          • PolyMide™ CoPA
      • Panchroma™
        • Panchroma™ Matte PLA
        • Panchroma™ Satin PLA
        • Panchroma™ Silk PLA
        • Panchroma™ Translucent PLA
        • Panchroma™ Starlight PLA
        • Panchroma™ Celestial PLA
        • Panchroma™ Metallic PLA
        • Panchroma™ Galaxy PLA
        • Panchroma™ Marble PLA
        • Panchroma™ Luminous PLA
        • Panchroma™ Glow PLA
        • Panchroma™ Neon PLA
        • Panchroma™ UV Shift PLA
        • Panchroma™ Dual Matte PLA
        • Panchroma™ Dual Silk PLA
        • Panchroma™ Dual Special PLA
        • Panchroma™ CoPE
      • Fiberon™
        • Fiberon™ PPS-CF10
        • Fiberon™ PET-CF17
        • Fiberon™ PA6-CF20
        • Fiberon™ PA6-GF25
        • Fiberon™ PA612-CF15
        • Fiberon™ PA12-CF10
        • Fiberon™ PETG-rCF08
        • Fiberon™ PETG-ESD
      • Specialty Filament
        • CosPLA
        • PolySmooth™ (PVB)
        • PolyCast™ (PVB)
        • PolySupport™ for PLA
        • PolySupport™ for PA12
        • PolyDissolve™ S1
    • Printer Profiles
      • PLA
        • PolyLite™ PLA
        • PLA Pro
        • PolyMax™ PLA
        • CosPLA
        • LW-PLA
        • PLA-CF
        • Panchroma™ Matte
        • Panchroma™ Satin
        • Panchroma™ Silk
        • Panchroma™ Others
        • HT-PLA
        • HT-PLA-GF
      • PET/PETG
        • PolyLite™ PETG
        • PolyMax™ PETG
        • Fiberon™ PET-CF17
        • Fiberon™ PETG-rCF08
        • Fiberon™ PETG-ESD
      • ABS/ASA
        • Polymaker ABS
        • Polymaker ASA
      • TPU
        • PolyFlex™ TPU90
        • PolyFlex™ TPU95
        • PolyFlex™ TPU95-HF
      • Polycarbonate
        • PolyLite™ PC
        • PolyMax™ PC
        • PolyMax™ PC-FR
        • Polymaker PC-ABS
      • Nylon (PA)
        • CoPA
        • Fiberon™ PA612-CF15
        • Fiberon™ PA6-CF20
        • Fiberon™ PA6-GF25
        • Fiberon™ PA12-CF10
      • PPS
        • Fiberon™ PPS-CF10
      • Specialty
        • Panchroma™ CoPE
        • PolySmooth™
        • PolyCast™
      • Support
        • PolySupport™ for PLA
        • PolySupport™ for PA12
        • PolyDissolve™ S1 (PVA)
    • Accessories
      • PolyDryer™
      • Polysher™
      • PolyBox™
    • PolyCore™ Pellets
      • Products
        • PolyCore™ PC-7413
        • PolyCore™ ASA-3000
        • PolyCore™ ASA-3012
        • PolyCore™ ABS-5012
        • PolyCore™ ABS-5022
        • PolyCore™ PETG-1000
        • PolyCore™ PETG-1013
        • PolyCore™ PETG-1211
        • PolyCore™ TPU-2000
      • Applications
        • Architecture
        • Indoor Decoration
        • Mold and Tooling
    • More About Our Products
      • Documents
        • Certifications and Declarations
        • Technical Data Sheets
          • PLA
            • PolyLite™ PLA
            • PolyLite™ PLA Pro
            • PolyMax™ PLA
            • CosPLA™
            • LW-PLA
            • PLA-CF
            • Draft PLA
            • Panchroma™ PLA
            • HT-PLA
            • HT-PLA-GF
          • PETG/PET
            • PolyLite™ PETG
            • PolyMax™ PETG
            • Fiberon™ PETG-rCF08
            • Fiberon™ PETG-ESD
            • Fiberon™ PET-CF17
          • ABS/ASA
            • PolyLite™ ABS
            • PolyLite™ ASA
          • TPU
            • PolyFlex™ TPU90
            • PolyFlex™ TPU95
            • PolyFlex™ TPU95-HF
          • Nylon
            • PolyMide™ CoPA
            • Fiberon™ PA6-CF20
            • Fiberon™ PA6-GF25
            • Fiberon™ PA612-CF15
            • Fiberon™ PA12-CF10
          • Polycarbonate
            • PolyLite™ PC
            • PolyMax™ PC
            • PolyMax™ PC-FR
            • Polymaker PC-ABS
            • Polymaker PC-PBT
          • Specialty & Support Materials
            • PolySmooth™
            • PolyCast™
            • PolySupport™ for PLA
            • PolySupport™ for PA12
            • PolyDissolve™ S1
          • PPS
            • Fiberon™ PPS-CF10
        • Safety Data Sheets
          • PLA
            • Panchroma™ PLA
            • PolyLite™ PLA
            • PolyLite™ PLA Pro
            • PolyMax™ PLA
            • CosPLA™
            • LW-PLA
            • PLA-CF
            • Draft PLA
            • HT-PLA
            • HT-PLA-GF
          • PETG/PET
            • PolyLite™ PETG
            • PolyMax™ PETG
            • Fiberon™ PETG-rCF08
            • Fiberon™ PETG-ESD
            • Fiberon™ PET-CF17
          • ABS/ASA
            • PolyLite™ ABS
            • PolyLite™ ASA
          • TPU
            • PolyFlex™ TPU90
            • PolyFlex™ TPU95
            • PolyFlex™ TPU95-HF
          • Nylon
            • PolyMide™ CoPA
            • Fiberon™ PA612-CF15
            • Fiberon™ PA6-CF20
            • Fiberon™ PA6-GF25
            • Fiberon™ PA12-CF10
          • Polycarbonate
            • PolyLite™ PC
            • PolyMax™ PC
            • PolyMax™ PC-FR
            • Polymaker PC-ABS
            • Polymaker PC-PBT
          • Specialty & Support Materials
            • PolySmooth™
            • PolyCast™
            • PolySupport™ for PLA
            • PolySupport™ for PA12
            • PolyDissolve™ S1
          • PPS
            • Fiberon™ PPS-CF10
      • Product Changelog
      • HEX Codes and Transmission Distances
  • Order Help
    • US and Canada
      • My Product is Not Performing as Expected
      • Order and Shipping Inquiries
      • Ordering Wholesale
      • Made in America Materials
      • Order FAQ
  • Rest of World
    • My Product is Not Performing as Expected
    • Ordering Filament
Powered by GitBook
LogoLogo

Shop

  • US Shop
  • Canada Shop
  • US Wholesale
  • EU Wholesale
  • Find a Reseller

Our Products

  • Prime Materials
  • Fiberon
  • Panchroma
  • Hardware
  • PolyCore Pellets

About Us

  • Contact Us
  • Company
  • Awards
  • News & Events
  • Career

More Links

  • New? Start Here!
  • Material App
  • Filament Guide
  • Join our Discord
  • All of our Links

©Polymaker

On this page
  • Version 1.0
  • 1. Product and Company Identification
  • 2. Hazards identification
  • 4. First Aid Measures
  • 9. Physical & Chemical Properies
  • 10. Chemical Stability & Reactivity Infrmation
  • 11. Toxicological Infrmation
  • 12. Ecological Infrmation
  • 13. Disposal Considerations
  • 14. Transpor Infrmation
  • 15. Regulatory Information
  • 16. Other Information

Was this helpful?

Export as PDF
  1. Polymaker Products
  2. More About Our Products
  3. Documents
  4. Safety Data Sheets
  5. Specialty & Support Materials

PolySupport™ for PA12

PreviousPolySupport™ for PLANextPolyDissolve™ S1

Last updated 3 months ago

Was this helpful?

Version 1.0

Issue date: 13/03/2022

Revision date: 13/03/2022 SDS record number: CSSS-TC0-010-210209

1. Product and Company Identification

Material name PolySupport for PA12

CAS# See section 3

Product code

Product use 3D Printing Filament.

Manufacturer/Supplier

Suppl ier(Manufactu rer): JF Polymers (Suzhou) Co., Ltd.

Address: Haicheng Industrial Park, Bldg 7, Changshu Economic Development Zone (CEDZ),

Changshu, Jiangsu Province 215513, China

Contact person(E-mail): zhenggang.cai@polymaker.com

Telephone: +86-512-52058005

Fax:

Emergency telephone Number: +86-512-52058005

2. Hazards identification

GHS classification

Phyical hazards Not classified

Health hazards Carcinogenicity Categor 1B

Environmental hazards Not classified

GHS label elements

Hazard Pictograms

Signal word Danger.

Hazard statement May cause cancer

Precautionary statement

Prevention Obtain special instructions befre use.

Do not handle until all safety precautions have been read and understood.

Wear protective gloves/protective clothing/eye protection/face protection.

Response If exposed or concerned: Get medical advice/attention.

Storage Store locked up.

Disposal Dispose of contents/container in accordance with local regulation.

Other hazards Not available.

  1. Composition / Infrmation on Ingredients

Components
CAS#
Percent

Chopped Glass Fiber

65997-17-3

1-20%

Poly(ethylene-co-1-octene)

26221-73-8

1-8%

4. First Aid Measures

First aid procedures

Eye contact Flush with running water for at least 15 minutes. If irritation persists get medical attention.

8. Exposure Controls I Personal Protection

Skin contact
Wash thoroughly with soap and water. Get medical attention in the unlikely event that irritation persists.

Inhalation

If breathed in, remove victim to fresh air and keep at rest in a pos仆ion comfortable fr breathing. If you feel unwell, seek medical attention.

Ingestion

Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

Notes to physician

Treat symptoms.

5. Fire Fighting Measure

Flammable properies

Not available.

Extinguishing media

Suitable extinguishing media

Use extinguishers suitable for surrounding fire.

Unsuitable extinguishing media

Not available.

Firefighting equipmentinstructions

Wear self contained breathing apparatus for fire fighting if necessary.

Hazardous combustion products

Carbon oxides.

6. Accidental Release Measures

Personal precautions

Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas.

Environmental precautions

Avoid disposing into drainage/sewer system or directly into the aquatic environment.

Methods fr cleaning up

Sweep up and shovel into suitable containers. Clean up affected area.

7. Handling and Storage

Handling

Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.

Storage

Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

Occupational exposure limits

US. OSHA Table Z-3 (29 CFR 1910.1000)

Component
Type
Value
Form

Poly(ethylene-co-1-octene) (CAS 26221-73-8)

TWA

5 mg/m3

Respirable fraction.

Poly(ethylene-co-1-octene) (CAS 26221-73-8)

TWA

15 mg/m3

Total dust.

Poly(ethylene-co-1-octene) (CAS 26221-73-8)

TWA

50 mppcf

Total dust.

Poly(ethylene-co-1-octene) (CAS 26221-73-8)

TWA

15 mppcf

Respirable fraction.

US. NIOSH: Pocket Guide to Chemical Hazards

Component
Type
Value
Form

Chopped Glass Fiber (CAS 65997-17-3)

TWA

3 fibers/cm3

Fiber.

Chopped Glass Fiber (CAS 65997-17-3)

TWA

3 fibers/cm3 5 mg/m3

Fibrous dust. Fiber, total

5 mg/m3 fibers, total dust

Biological limit values No biological exposure limits noted fr the ingredient(s).

Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Individual protection measures, such as personal protective equipment:

Eye / face protection Chemical safety goggles.

Skin protection Wear normal working clothing. Handle with gloves.

Respirator protection Wear approved mask/respirator.

General hygiene Wash hands, forearms and face thoroughly after handling chemical products,

9. Physical & Chemical Properies

Appearance

Physical state Solid

Form Solid

Color Beige

Odor Odorless

Odor threshold Not available

pH Not available

Vapor pressure Not available

Vapor density Not available

Boiling point Not available

Melting pointJFreezing point 215°C

Solubility (water) Insoluble

Relative Density 1.20

Flash point Not available

Parition coeficient Not available

Flammability limits in air, upper, %by volume Not available

Flammability limits in air, lower, % by volume Not available

Auto-ignition temperature Not available

voe Not available

Percent volatile Not available

Molecular Formula Not available

Molecular Weight Not available

Other data

Viscosity Not available

Dissociation constant Not available

10. Chemical Stability & Reactivity Infrmation

Reactivity The substance is stable under normal storage and handling conditions.

Chemical stability Material is stable under normal conditions.

Conditions to avoid Incompatible materials.

Incompatible materials Strong oxidizing agents.

Hazardous decomposition products Carbon oxides.

Possibility of hazardous reactions No hazardous reactions known.

11. Toxicological Infrmation

Toxicokinetics, metabolism and distribution:

Non-human toxicological data: Not available

Infrmation on toxicological efcts:

Acute toxicity:

Calcium chloride(CAS# 10043-52-)

LD50(0ral, Rat): 2 301 mg/kg bw

LD50(Dermal, Rabbit): > 5 000 mg/kg bw

LC50(1nhalation, Rat): Not available

Skin corrosion/Irritation: Not classified

Serious ey damage/irritation: Not classified

Respiratory or skin sensitization: Not classified

Germ cell mutagenicity: Not classified

Carcinogenicity: May cause cancer.

Reproductive toxicity: Not classified

STOT- single exposure: Not classified

STOT-repeated exposure: Not classified

Aspiration hazard: Not classified

12. Ecological Infrmation

Toxicity:

Calcium chloride{CAS# 10043-52-4)

Acute toxicity
Acute toxicity
Time
Species
Method
Evaluation
Remarks

LC50

N/A

96h

Fish

OECD203

N/A

N/A

LC50

2 400 mg/L

48h

Daphnia

OECD202

N/A

N/A

EC50

2 900 mg/L

72 h

Algae

OECD 201

N/A

N/A

Persistence and degradability: Not available.

Bioaccumulative potential: Not available.

Mobility in soil: Not available.

Results of PBT&vPvB assessment: Not available.

Other adverse efects: Not available.

13. Disposal Considerations

Disposal instructions Dispose of contents/container in accordance with

local/regional/national/international regulations.

Contaminated packaging Since emptied containers may retain product residue, follow label warnings even afer container is emptied.

14. Transpor Infrmation

DOT

Basic shipping requirements:

UN number Not regulated

Proper shipping name Not regulated

Hazard class Not regulated

Packing group Not regulated

Environmental hazards No

IATA

UN number Not regulated

UN proper shipping name Not regulated

Transpor hazard class{es) Not regulated

Packing group Not regulated

Environmental hazards No

IMDG

UN number Not regulated

UN proper shipping name Not regulated

Transpor hazard class{es) Not regulated

Packing group Not regulated

Environmental hazards No

15. Regulatory Information

US federal regulations

Toxic Substances Control Act (TSCA)

TSCA Section 12(b) Expor Notification (40 CFR 707, Subpt. D)

Not regulated.

CERCLA Hazardous Substance List (40 CFR 302.4)

Not listed.

SARA 304 Emergency release notification

Not regulated.

OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)

Not regulated.

Superund Amendments and Reauthorization Act of 1986 (SARA)

SARA 302 Extremely hazardous substance

Not listed.

SARA 311/312 Hazardous chemical No

SARA 313 (TRI reporing)

Not regulated.

Other federal regulations

Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List

Not regulated.

Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)

Not regulated.

Safe Drinking Water Act (SDWA) Not regulated.

US state regulations

California Proposition 65

US. California. Candidate Chemicals List. Safer Consumer Products Regulations (Cal. Code Regs, tit. 22, 69502.3, subd. (a))

Chopped Glass Fiber (GAS 65997-17-3)

16. Other Information

HMIS衙atings Health: 4

Flammability: 1

Physical hazard: 0

NFPA ratings Health: 4

Flammability: 1

Instability: 0

Disclaimer The infrmation in the sheet was written based on the best knowledge and experience currently available.

Issue date 05-07-2019

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. This shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.

797KB
PolySupport for PA12_SDS_US_EN_V1.pdf
pdf