LogoLogo
Polymaker.comMaterial PropertiesFilament GuidePanchromaFiberon
  • Welcome to Polymaker!
  • The Basics
    • Introduction to 3D Printing
      • FAQ
      • Good Practices
      • Find Your Filament
      • Glossary of Terminology
    • 3D Printing Materials
      • PLA
      • PETG
      • PET
      • ABS
      • ASA
      • TPU
      • PA
      • PC
      • PP
      • PPS
      • Carbon Fiber Reinforced Filaments
    • 3D Printers
      • Diagram of a 3D Printer
        • Extruders
        • Nozzles
        • Build Plates
      • Maintenance
      • Acessories and Replacements
      • Quality Options
      • Resin Printing
    • 3D Slicers
      • Slicer Software Options
      • Quality (Layer Height)
      • Printing Temperature
      • Build Plate Temperature
      • Printing Speeds
      • Shell Walls
      • Infil
      • Top/Bottom Layers
      • Travel and Retraction
      • Cooling
      • Support Structures
    • Applications
      • Protoyping
      • Toys and Fun Gadets
      • Cosplay and Props
      • Custom Printers
      • Hueforge Painting
      • Automotive
      • Drones and RC Planes
      • Light Boxes
      • Robotics
      • Custom Tooling
    • Fun 3D Printing Facts
      • Airflow Is More Important than Heat when Drying
      • Combining Materials to Make Composites
      • Extrusion Temp ≠ Printing Temp
      • No Material is FDA Approved as Food Safe
      • PLA Can Be Weather Resistant
      • Print Orientation Affects Strength
      • Printing Fast = Matte Surface Finish
      • Standard PLA is Actually Strong
  • Printing Tips
    • By Material Type
      • Test Prints
    • Common Printing Issues
      • Black Spots on Print
      • Blobs and Oozing
      • Curling of Layers and Angles
      • Elephant Foot (Smooshed First Layer)
      • Extruder Motor Skipping/ Nozzle Clogs
      • Ghosting (Echo/Ringing Effect)
      • Hairy or Stringy Prints
      • Layer Bulges
      • Layer Shifts
      • Missing Layers and Holes in Prints
      • Poor Layer Adhesion
      • Print Not Sticking to Build Plate
      • Running Out Of Filament
      • Ugly Tops of Prints or Ugly Thin Prints
      • Warping
      • Z-Axis Wobble
    • Post-Processing
      • Moisture Conditioning
      • Annealing
      • Glueing
      • Sanding
      • Smoothing
      • Painting
    • Material Science
      • What are Polymers?
      • Temperature and Polymers
      • Warping
      • Oozing
      • Overhangs
      • Strength Testing
  • Polymaker Products
    • About Polymaker
      • Polymaker's Technologies
      • Polymaker FAQ
      • Basic Tips for Polymaker Material
    • Polymaker Filaments
      • Prime Materials
        • Functional PLA
          • PolyLite™ PLA
          • PLA Pro
          • PolyMax PLA
          • LW-PLA
          • PLA-CF
          • Draft PLA
          • Matte PLA for Production
        • PETG
          • PolyLite PETG
          • PolyMax PETG
        • ABS and ASA
          • Polymaker ABS
          • Polymaker ASA
        • Flexible TPU
          • PolyFlex™ TPU90
          • PolyFlex™ TPU95
          • PolyFlex™ TPU95-HF
        • Polycarbonate
          • PolyLite™ PC
          • PolyMax™ PC
          • PolyMax™ PC-FR
          • Polymaker PC-ABS
          • Polymaker PC-PBT
        • Nylon (PA)
          • PolyMide™ CoPA
      • Panchroma™
        • Panchroma™ Matte PLA
        • Panchroma™ Satin PLA
        • Panchroma™ Silk PLA
        • Panchroma™ Translucent PLA
        • Panchroma™ Starlight PLA
        • Panchroma™ Celestial PLA
        • Panchroma™ Metallic PLA
        • Panchroma™ Galaxy PLA
        • Panchroma™ Marble PLA
        • Panchroma™ Luminous PLA
        • Panchroma™ Glow PLA
        • Panchroma™ Neon PLA
        • Panchroma™ UV Shift PLA
        • Panchroma™ Dual Matte PLA
        • Panchroma™ Dual Silk PLA
        • Panchroma™ Dual Special PLA
        • Panchroma™ CoPE
      • Fiberon™
        • Fiberon™ PPS-CF10
        • Fiberon™ PET-CF17
        • Fiberon™ PA6-CF20
        • Fiberon™ PA6-GF25
        • Fiberon™ PA612-CF15
        • Fiberon™ PA12-CF10
        • Fiberon™ PETG-rCF08
        • Fiberon™ PETG-ESD
      • Specialty Filament
        • CosPLA
        • PolySmooth™ (PVB)
        • PolyCast™ (PVB)
        • PolySupport™ for PLA
        • PolySupport™ for PA12
        • PolyDissolve™ S1
    • Printer Profiles
      • PLA
        • PolyLite™ PLA
        • PLA Pro
        • PolyMax™ PLA
        • CosPLA
        • LW-PLA
        • PLA-CF
        • Panchroma™ Matte
        • Panchroma™ Satin
        • Panchroma™ Silk
        • Panchroma™ Others
      • PET/PETG
        • PolyLite™ PETG
        • PolyMax™ PETG
        • Fiberon™ PET-CF17
        • Fiberon™ PETG-rCF08
        • Fiberon™ PETG-ESD
      • ABS/ASA
        • Polymaker ABS
        • Polymaker ASA
      • TPU
        • PolyFlex™ TPU90
        • PolyFlex™ TPU95
        • PolyFlex™ TPU95-HF
      • Polycarbonate
        • PolyLite™ PC
        • PolyMax™ PC
        • PolyMax™ PC-FR
        • Polymaker PC-ABS
      • Nylon (PA)
        • CoPA
        • Fiberon™ PA612-CF15
        • Fiberon™ PA6-CF20
        • Fiberon™ PA6-GF25
        • Fiberon™ PA12-CF10
      • PPS
        • Fiberon™ PPS-CF10
      • Specialty
        • Panchroma™ CoPE
        • PolySmooth™
        • PolyCast™
      • Support
        • PolySupport™ for PLA
        • PolySupport™ for PA12
        • PolyDissolve™ S1 (PVA)
    • Accessories
      • PolyDryer™
      • Polysher™
      • PolyBox™
    • PolyCore™ Pellets
      • Products
        • PolyCore™ PC-7413
        • PolyCore™ ASA-3000
        • PolyCore™ ASA-3012
        • PolyCore™ ABS-5012
        • PolyCore™ ABS-5022
        • PolyCore™ PETG-1000
        • PolyCore™ PETG-1013
        • PolyCore™ PETG-1211
        • PolyCore™ TPU-2000
      • Applications
        • Architecture
        • Indoor Decoration
        • Mold and Tooling
    • More About Our Products
      • Documents
        • Certifications and Declarations
        • Technical Data Sheets
          • PLA
            • PolyLite™ PLA
            • PolyLite™ PLA Pro
            • PolyMax™ PLA
            • CosPLA™
            • LW-PLA
            • PLA-CF
            • Draft PLA
            • Panchroma™ PLA
          • PETG/PET
            • PolyLite™ PETG
            • PolyMax™ PETG
            • Fiberon™ PETG-rCF08
            • Fiberon™ PETG-ESD
            • Fiberon™ PET-CF17
          • ABS/ASA
            • PolyLite™ ABS
            • PolyLite™ ASA
          • TPU
            • PolyFlex™ TPU90
            • PolyFlex™ TPU95
            • PolyFlex™ TPU95-HF
          • Nylon
            • PolyMide™ CoPA
            • Fiberon™ PA6-CF20
            • Fiberon™ PA6-GF25
            • Fiberon™ PA612-CF15
            • Fiberon™ PA12-CF10
          • Polycarbonate
            • PolyLite™ PC
            • PolyMax™ PC
            • PolyMax™ PC-FR
            • Polymaker PC-ABS
            • Polymaker PC-PBT
          • Specialty & Support Materials
            • PolySmooth™
            • PolyCast™
            • PolySupport™ for PLA
            • PolySupport™ for PA12
            • PolyDissolve™ S1
          • PPS
            • Fiberon™ PPS-CF10
        • Safety Data Sheets
          • PLA
            • Panchroma™ PLA
            • PolyLite™ PLA
            • PolyLite™ PLA Pro
            • PolyMax™ PLA
            • CosPLA™
            • LW-PLA
            • PLA-CF
            • Draft PLA
          • PETG/PET
            • PolyLite™ PETG
            • PolyMax™ PETG
            • Fiberon™ PETG-rCF08
            • Fiberon™ PETG-ESD
            • Fiberon™ PET-CF17
          • ABS/ASA
            • PolyLite™ ABS
            • PolyLite™ ASA
          • TPU
            • PolyFlex™ TPU90
            • PolyFlex™ TPU95
            • PolyFlex™ TPU95-HF
          • Nylon
            • PolyMide™ CoPA
            • Fiberon™ PA612-CF15
            • Fiberon™ PA6-CF20
            • Fiberon™ PA6-GF25
            • Fiberon™ PA12-CF10
          • Polycarbonate
            • PolyLite™ PC
            • PolyMax™ PC
            • PolyMax™ PC-FR
            • Polymaker PC-ABS
            • Polymaker PC-PBT
          • Specialty & Support Materials
            • PolySmooth™
            • PolyCast™
            • PolySupport™ for PLA
            • PolySupport™ for PA12
            • PolyDissolve™ S1
          • PPS
            • Fiberon™ PPS-CF10
      • Product Changelog
      • HEX Codes and Transmission Distances
  • Order Help
    • US and Canada
      • My Product is Not Performing as Expected
      • Order and Shipping Inquiries
      • Ordering Wholesale
      • Made in America Materials
      • Order FAQ
  • Rest of World
    • My Product is Not Performing as Expected
Powered by GitBook
LogoLogo

Shop

  • US Shop
  • Canada Shop
  • US Wholesale
  • EU Wholesale
  • Find a Reseller

Our Products

  • Prime Materials
  • Fiberon
  • Panchroma
  • Hardware
  • PolyCore Pellets

About Us

  • Contact Us
  • Company
  • Awards
  • News & Events
  • Career

More Links

  • New? Start Here!
  • Material App
  • Filament Guide
  • Join our Discord
  • All of our Links

©Polymaker

On this page
  • Version 1.1
  • 1. Product and Company Identification
  • 2. Hazards identification
  • 3. Composition / Information on Ingredients
  • 4. First Aid Measures
  • 8. Exposure Controls / Personal Protection
  • 9. Physical & Chemical Properties
  • 10. Chemical Stability & Reactivity Information
  • 11. Toxicological Information
  • 12. Ecological Information
  • 13. Disposal Considerations
  • 14. Transport Information
  • 16. Other Information

Was this helpful?

Export as PDF
  1. Polymaker Products
  2. More About Our Products
  3. Documents
  4. Safety Data Sheets
  5. PLA

LW-PLA

PreviousCosPLA™NextPLA-CF

Last updated 2 months ago

Was this helpful?

Version 1.1

Issue date:07/29/2019

Revision date:12/31/2021 SDS record number: CSSS-TCO-010-132052

1. Product and Company Identification

Material name PolyLite LW-PLA

CAS # See section 3

Product code -

Product use 3D Printing Filament

Manufacturer/Supplier

Supplier(Manufacturer): JF Polymers (Suzhou) Co., Ltd.

Address: Building 6&7&11, No.2, Hai Cheng Road, Chang Shu Economic &Technological

Development Zone, 215513, People’s Republic of China

Contact person(E-mail): zhenggang.cai@polymaker.com

Telephone: +86-512-52058005

Fax: -

Emergency telephone Number: +86-512-52058005

2. Hazards identification

GHS classification

Physical hazards Not classified

Health hazards Not classified

Environmental hazards Not classified

GHS label elements

Hazard Pictograms No hazard pictogram is used.

Signal word No signal word is used.

Hazard statement Not applicable.

Precautionary statement

Prevention Not applicable.

Response Not applicable.

Storage Not applicable.

Disposal Not applicable.

Other hazards Not available.

3. Composition / Information on Ingredients

This product does not contain hazardous ingredients above cut-off value according to HCS2012.

4. First Aid Measures

First aid procedures

Eye contact None expected to require first aid measures. Flush with running water for at least 15 minutes. If irritation persists get medical attention.

Skin contact None expected to require first aid measures. Wash thoroughly with soap and water.Get medical attention in the unlikely event that irritation persists.

Inhalation

None expected to require first aid measures. If breathed in, remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical attention.

Ingestion Immediate first aid is not likely to be required. A physician or poison control center can be contacted for advice.

Notes to physician Treat symptoms.

  1. Fire Fighting Measure

Flammable properties Not available.

Extinguishing media

Suitable extinguishing media Use extinguishers suitable for surrounding fire.

Unsuitable extinguishing media Not available.

Firefighting equipment/instructions Wear self contained breathing apparatus for fire fighting if necessary.

Hazardous combustion products Carbon oxides.

  1. Accidental Release Measures

Personal precautions Use personal protective equipment. Ensure adequate ventilation. Evacuate personnel to safe areas.

Environmental precautions Avoid disposing into drainage/sewer system or directly into the aquatic environment.

Methods for cleaning up Sweep up and shovel into suitable containers. Clean up affected area.

  1. Handling and Storage

Handling Ensure good ventilation/exhaustion at the workplace. Wash thoroughly after handling.

Storage Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

Containers which are opened must be carefully resealed and kept upright to prevent leakage.

8. Exposure Controls / Personal Protection

Occupational exposure limits This product has no PEL, TLV, or other recommended exposure limit.

Biological limit values No biological exposure limits noted for the ingredient(s).

Appropriate engineering controls: Handle in accordance with good industrial hygiene and safety practice. Wash

hands before breaks and at the end of workday.

Individual protection measures, such as personal protective equipment:

Eye / face protection No special protection required.

Skin protection No special protection required.

Respiratory protection No special protection required.

General hygiene Wash hands, forearms and face thoroughly after handling chemical products,

considerations before eating, smoking and using the lavatory and at the end of the working period.

9. Physical & Chemical Properties

Appearance

Physical state Solid

Form Solid

Color Wood color

Odor Not available

Odor threshold Not available

pH Not available

Vapor pressure Not available

Vapor density Not available

Boiling point Not available

Melting point/Freezing point 150°C

Solubility (water) Insoluble

Relative Density 0.85

Flash point Not available

Partition coefficient Not available

Flammability limits in air, upper, %by volume Not available

Flammability limits in air, lower, % by volume Not available

Auto-ignition temperature Not available

VOC Not available

Percent volatile Not available

Molecular Formula Not available

Molecular Weight Not available

Other data

Viscosity Not available

Dissociation constant Not available

10. Chemical Stability & Reactivity Information

Reactivity The substance is stable under normal storage and handling conditions.

Chemical stability Material is stable under normal conditions.

Conditions to avoid Incompatible materials.

Incompatible materials Strong oxidizing agents.

Hazardous decomposition products Carbon oxides.

Possibility of hazardous reactions No hazardous reactions known.

11. Toxicological Information

Toxicokinetics, metabolism and distribution:

Non-human toxicological data: Not available

Information on toxicological effects:

Acute toxicity:

LD50(Oral, Rat): Not available

LD50(Dermal, Rabbit): Not available

LC50(Inhalation, Rat): Not available

Skin corrosion/Irritation: Not classified

Serious eye damage/irritation: Not classified

Respiratory or skin sensitization: Not classified

Germ cell mutagenicity: Not classified

Carcinogenicity: Not classified

Reproductive toxicity: Not classified

STOT- single exposure: Not classified

STOT-repeated exposure: Not classified

Aspiration hazard: Not classified

12. Ecological Information

Toxicity:

Acute toxicity
Acute toxicity
Time
Species
Method
Evaluation
Remarks

LC50

N/A

96h

Fish

OECD 203

N/A

N/A

EC50

N/A

48h

Daphnia

OECD 202

N/A

N/A

EC50

N/A

72h

Algae

OECD 201

N/A

N/A

Persistence and degradability: Not available.

Bioaccumulative potential: Not available.

Materialname: PolyLite LW-PLA

Version#:1.1Revisiondate:12-31-2021. Issue date: 07-29-2019.

Mobility in soil: Not available.

Results of PBT&vPvB assessment: Not available.

Other adverse effects: Not available.

13. Disposal Considerations

Disposal instructions Dispose of contents/container in accordance with

local/regional/national/international regulations.

Contaminated packaging Since emptied containers may retain product residue, follow label warnings even after container is emptied.

14. Transport Information

DOT

Basic shipping requirements:

UN number Not regulated

Proper shipping name Not regulated

Hazard class Not regulated

Packing group Not regulated

Environmental hazards No

IATA

UN number Not regulated

UN proper shipping name Not regulated

Transport hazard class(es) Not regulated

Packing group Not regulated

Environmental hazards No

IMDG

UN number Not regulated

UN proper shipping name Not regulated

Transport hazard class(es) Not regulated

Packing group Not regulated

Environmental hazards No

  1. Regulatory Information

US federal regulations

Toxic Substances Control Act (TSCA)

TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)

Not regulated.

CERCLA Hazardous Substance List (40 CFR 302.4)

Not listed.

SARA 304 Emergency release notification

Not regulated.

OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)

Not regulated.

Superfund Amendments and Reauthorization Act of 1986 (SARA)

SARA 302 Extremely hazardous substance

Not listed.

SARA 311/312 Hazardous chemical No

SARA 313 (TRI reporting)

Not regulated.

Other federal regulations

Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List

Not regulated.

Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)

Not regulated.

Safe Drinking Water Act (SDWA) Not regulated.

16. Other Information

HMIS®ratings Health:0

Flammability: 1

Physical hazard: 0

NFPA ratings Health:0

Flammability: 1

Instability: 0

Disclaimer The information in the sheet was written based on thebest knowledge and

experience currently available.

Issue date 07-29-2019

Author:Hangzhou C&K Testing Technic Co.,Ltd Website:www.cirs-ck.com Tel:0571-89900715 Email:test@cirs-group.com

1MB
PolyLite_LW-PLA_SDS_US_EN_V1.1.pdf
pdf