LogoLogo
CtrlK
Polymaker.comMaterial PropertiesFilament GuidePanchromaFiberon
Français (FR)
Français (FR)
  • Bienvenue chez Polymaker !
  • Les bases
    • Introduction à l'impression 3D
      • FAQ
      • Bonnes pratiques
      • Trouvez votre filament
      • Glossaire de terminologie
    • Matériaux pour impression 3D
      • PLA
      • PETG
      • PET
      • ABS
      • ASA
      • TPU
      • PA
      • PC
      • PP
      • PPS
      • Filaments renforcés par fibre de carbone
    • Imprimantes 3D
      • Schéma d'une imprimante 3D
        • Extrudeurs
        • Buses
        • Plateaux de construction
      • Maintenance
      • Accessoires et pièces de rechange
      • Options de qualité
      • Impression résine
    • Logiciels de découpe (Slicers)
      • Options de logiciels de découpe
      • Qualité (hauteur de couche)
      • Température d'impression
      • Température de la plaque de construction
      • Vitesses d'impression
      • Parois (Shell Walls)
      • Infill
      • Couches supérieures/inférieures
      • Déplacement et rétraction
      • Refroidissement
      • Structures de support
      • Importer un profil dans un slicer
    • Applications
      • Prototypage
      • Jouets et gadgets amusants
      • Cosplay et accessoires
      • Imprimantes personnalisées
      • Peinture Hueforge
      • Automobile
      • Drones et avions radiocommandés
      • Boîtes lumineuses
      • Robotique
      • Outillage personnalisé
    • Faits amusants sur l'impression 3D
      • Le flux d'air est plus important que la chaleur lors du séchage
      • Bobines en papier vs bobines en plastique
      • Cartésien vs CoreXY vs Delta
      • Combiner des matériaux pour fabriquer des composites
      • Propriétés d'isolation électrique des matériaux d'impression 3D
      • Matériaux d'impression 3D ESD sûrs et leur fonctionnement
      • Température d'extrusion ≠ Température d'impression
      • La première couche est la plus importante
      • "Jerk" ne signifie pas ce que vous pensez
      • Buses plus grandes = meilleure adhésion des couches
      • La vitesse volumétrique maximale limite votre vitesse d'impression
      • Aucun matériau n'est approuvé par la FDA comme sûr pour les aliments
      • Toutes les structures de support ne se valent pas
      • Surrextrusion vs sous-extrusion
      • Le PLA peut résister aux intempéries
      • L'orientation d'impression affecte la résistance
      • Imprimer vite = finition mate
      • Le PLA standard est en réalité solide
  • Conseils d'impression
    • Par type de matériau
      • Impressions de test
    • Problèmes d'impression courants
      • Taches noires sur l'impression
      • Gouttes et suintement
      • Enroulement des couches et des angles
      • Pied d'éléphant (première couche écrasée)
      • Saut du moteur d'extrudeur / Buses bouchées
      • Ghosting (effet d'écho/ondulation)
      • Impressions velues ou filandreuses
      • Renflements de couche
      • Décalages de couches
      • Couches manquantes et trous dans les impressions
      • Mauvaise adhésion entre les couches
      • L'impression n'adhère pas à la plaque de construction
      • Pénurie de filament
      • Dessus d'impression moche ou impressions fines inesthétiques
      • Déformation (Warping)
      • Filament humide
      • Oscillation de l'axe Z
    • Post-traitement
      • Recuit (Annealing)
      • Conditionnement contre l'humidité
      • Collage
      • Ponçage
      • Lissage
      • Peinture
    • Science des matériaux
      • Que sont les polymères ?
      • Température et polymères
      • Déformation (Warping)
      • Suintement
      • Surplombs
      • Test de résistance
  • Produits Polymaker
    • À propos de Polymaker
      • Technologies de Polymaker
      • FAQ Polymaker
      • Conseils de base pour les matériaux Polymaker
      • Durabilité
      • Autres informations Polymaker
        • Bobine en carton = pas de problème
        • PLA vs. PolyMax PLA vs. PLA Pro
        • Nous séchons notre filament avant expédition
    • Filaments Polymaker
      • Matériaux Prime
        • PLA fonctionnel
          • PolyLite™ PLA
          • PLA Pro
          • PolyMax PLA
          • LW-PLA
          • PLA-CF
          • Draft PLA
          • PLA mat pour la production
          • PolySonic™ PLA
          • PolySonic™ PLA Pro
          • HT-PLA
          • HT-PLA-GF
        • PETG
          • PolyLite PETG
          • PolyMax PETG
        • ABS et ASA
          • Polymaker ABS
          • Polymaker ASA
        • TPU flexible
          • PolyFlex™ TPU90
          • PolyFlex™ TPU95
          • PolyFlex™ TPU95-HF
        • Polycarbonate
          • PolyLite™ PC
          • PolyMax™ PC
          • PolyMax™ PC-FR
          • Polymaker PC-ABS
          • Polymaker PC-PBT
        • Nylon (PA)
          • PolyMide™ CoPA
      • Panchroma™
        • Panchroma™ PLA Mat
        • Panchroma™ PLA Satin
        • Panchroma™ PLA Soie
        • Panchroma™ PLA Translucide
        • Panchroma™ PLA Starlight
        • Panchroma™ PLA Céleste
        • Panchroma™ PLA Métallique
        • Panchroma™ PLA Galaxy
        • Panchroma™ PLA Marbre
        • Panchroma™ PLA Lumineux
        • Panchroma™ PLA Glow
        • Panchroma™ PLA Néon
        • Panchroma™ PLA Changement UV
        • Panchroma™ PLA Double Mat
        • Panchroma™ PLA Double Soie
        • Panchroma™ PLA Double Spécial
        • Panchroma™ CoPE
      • Fiberon™
        • Fiberon™ PPS-CF10
        • Fiberon™ PPS-GF20
        • Fiberon™ PET-CF17
        • Fiberon™ PA6-CF20
        • Fiberon™ PA6-GF25
        • Fiberon™ PA612-CF15
        • Fiberon™ PA12-CF10
        • Fiberon™ PETG-rCF08
        • Fiberon™ PETG-ESD
        • Fiberon™ PA612-ESD
      • Filament spécialisé
        • CosPLA
        • PolySmooth™ (PVB)
        • PolyCast™ (PVB)
        • PolySupport™ pour PLA
        • PolySupport™ pour PA12
        • PolyDissolve™ S1
    • Profils d'imprimante
      • PLA
        • PolyLite™ PLA
        • PLA Pro
        • PolyMax™ PLA
        • CosPLA
        • LW-PLA
        • PLA-CF
        • Panchroma™ Mat
        • Panchroma™ Satin
        • Panchroma™ Soie
        • Autres Panchroma™
        • PolySonic™ PLA
        • PolySonic™ PLA Pro
        • HT-PLA
        • HT-PLA-GF
      • PET/PETG
        • PolyLite™ PETG
        • PolyMax™ PETG
        • Fiberon™ PET-CF17
        • Fiberon™ PETG-rCF08
        • Fiberon™ PETG-ESD
      • ABS/ASA
        • Polymaker ABS
        • Polymaker ASA
      • TPU
        • PolyFlex™ TPU90
        • PolyFlex™ TPU95
        • PolyFlex™ TPU95-HF
      • Polycarbonate
        • PolyLite™ PC
        • PolyMax™ PC
        • PolyMax™ PC-FR
        • Polymaker PC-ABS
      • Nylon (PA)
        • CoPA
        • Fiberon™ PA612-CF15
        • Fiberon™ PA6-CF20
        • Fiberon™ PA6-GF25
        • Fiberon™ PA12-CF10
        • Fiberon™ PA612-ESD
      • PPS
        • Fiberon™ PPS-CF10
        • Fiberon™ PPS-GF20
      • Spécialité
        • Panchroma™ CoPE
        • PolySmooth™
        • PolyCast™
      • Support
        • PolySupport™ pour PLA
        • PolySupport™ pour PA12
        • PolyDissolve™ S1 (PVA)
    • Accessoires
      • PolyDryer™
      • Polysher™
      • PolyBox™
    • Granulés PolyCore™
      • Produits
        • PolyCore™ PC-7413
        • PolyCore™ ASA-3000
        • PolyCore™ ASA-3012
        • PolyCore™ ABS-5012
        • PolyCore™ ABS-5022
        • PolyCore™ PETG-1000
        • PolyCore™ PETG-1013
        • PolyCore™ PETG-1211
        • PolyCore™ TPU-2000
      • Applications
        • Architecture
        • Décoration intérieure
        • Moules et outillage
    • Plus d'informations sur nos produits
      • Documents
        • Certifications et déclarations
        • Fiches techniques
          • PLA
            • PolyLite™ PLA
            • PolyLite™ PLA Pro
            • PolyMax™ PLA
            • CosPLA™
            • LW-PLA
            • PLA-CF
            • Draft PLA
            • Panchroma™ PLA
            • HT-PLA
            • HT-PLA-GF
            • PolySonic™ PLA
            • PolySonic™ PLA Pro
          • PETG/PET
            • PolyLite™ PETG
            • PolyMax™ PETG
            • Fiberon™ PETG-rCF08
            • Fiberon™ PETG-ESD
            • Fiberon™ PET-CF17
          • ABS/ASA
            • PolyLite™ ABS
            • PolyLite™ ASA
          • TPU
            • PolyFlex™ TPU90
            • PolyFlex™ TPU95
            • PolyFlex™ TPU95-HF
          • Nylon
            • PolyMide™ CoPA
            • Fiberon™ PA6-CF20
            • Fiberon™ PA6-GF25
            • Fiberon™ PA612-CF15
            • Fiberon™ PA12-CF10
            • Fiberon™ PA612-ESD
          • Polycarbonate
            • PolyLite™ PC
            • PolyMax™ PC
            • PolyMax™ PC-FR
            • Polymaker PC-ABS
            • Polymaker PC-PBT
          • Matériaux spéciaux et supports
            • PolySmooth™
            • PolyCast™
            • PolySupport™ pour PLA
            • PolySupport™ pour PA12
            • PolyDissolve™ S1
          • PPS
            • Fiberon™ PPS-CF10
            • Fiberon™ PPS-GF20
        • Fiches de données de sécurité
          • PLA
            • Panchroma™ PLA
            • PolyLite™ PLA
            • PolyLite™ PLA Pro
            • PolyMax™ PLA
            • CosPLA™
            • LW-PLA
            • PLA-CF
            • Draft PLA
            • HT-PLA
            • HT-PLA-GF
            • PolySonic™ PLA
            • PolySonic™ PLA Pro
          • PETG/PET
            • PolyLite™ PETG
            • PolyMax™ PETG
            • Fiberon™ PETG-rCF08
            • Fiberon™ PETG-ESD
            • Fiberon™ PET-CF17
          • ABS/ASA
            • PolyLite™ ABS
            • PolyLite™ ASA
          • TPU
            • PolyFlex™ TPU90
            • PolyFlex™ TPU95
            • PolyFlex™ TPU95-HF
          • Nylon
            • PolyMide™ CoPA
            • Fiberon™ PA612-CF15
            • Fiberon™ PA6-CF20
            • Fiberon™ PA6-GF25
            • Fiberon™ PA12-CF10
            • Fiberon™ PA612-ESD
          • Polycarbonate
            • PolyLite™ PC
            • PolyMax™ PC
            • PolyMax™ PC-FR
            • Polymaker PC-ABS
            • Polymaker PC-PBT
          • Matériaux spéciaux et supports
            • PolySmooth™
            • PolyCast™
            • PolySupport™ pour PLA
            • PolySupport™ pour PA12
            • PolyDissolve™ S1
          • PPS
            • Fiberon™ PPS-CF10
            • Fiberon™ PPS-GF20
      • Journal des modifications du produit
      • Codes HEX et distances de transmission
      • Questions produit uniques
  • Aide à la commande
    • États-Unis et Canada
      • Mon produit ne fonctionne pas comme attendu
      • Questions sur les commandes et l'expédition
      • Politique de retour (commerce de détail USA)
      • Commander en gros
      • Matériaux fabriqués en Amérique
      • FAQ commande
  • Reste du monde
    • Mon produit ne fonctionne pas comme attendu
    • Commander du filament
Propulsé par GitBook
Sur cette page

Ce contenu vous a-t-il été utile ?

  1. Produits Polymaker
  2. Plus d'informations sur nos produits
  3. Documents
  4. Fiches de données de sécurité

ABS/ASA

PolyLite™ ABSPolyLite™ ASA
PrécédentFiberon™ PET-CF17SuivantPolyLite™ ABS

Ce contenu vous a-t-il été utile ?

LogoLogo

Shop

  • US Shop
  • Canada Shop
  • US Wholesale
  • EU Wholesale
  • Find a Reseller

Our Products

  • Prime Materials
  • Fiberon
  • Panchroma
  • Hardware
  • PolyCore Pellets

About Us

  • Contact Us
  • Company
  • Awards
  • News & Events
  • Career

More Links

  • New? Start Here!
  • Material App
  • Filament Guide
  • Join our Discord
  • All of our Links

©Polymaker